ELECTRICAL CONNECTION
• Connect the hood to the mains through a
• Remove the grease filters (see paragraph Maintenance) being sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.
Chimney assembly
Upper exhaust Chimney | 2.1 | ||
• | Slightly widen the two sides of the upper chimney and hook | ||
2 | |||
| them behind the brackets 7.2.1, making sure that they are well | ||
| seated. | 2.2 | |
• | Secure the sides to the brackets using the 4 screws 12c (2,9 x |
| |
| 9,5) supplied. |
| |
Lower exhaust Chimney
• Slightly widen the two sides of the chimney and hook them between the upper chimney and the wall, making sure that they are well seated.
•Fix the lower part laterally to the hood body using the 2 screws 12c (2,9 x 9,5) supplied.
7.2.1
12c
12c
EN |
| 3 |
| 31 |
