INSTALLATION
3 - INSTALLATION
The following scheme has to be observed:
3.1- Installation of the
3.2- Set the hood for recirculation or evacuation
3.2 - Connect the hood to the mains supply and ensure that it works properly
Cooker Hood | Side A | Side B | |
Dimensions | |||
|
| ||
520 mm | 497 mm | 259 mm | |
|
|
| |
700 mm | 677 mm | 259 mm | |
|
|
|
3.1 - Installation of the fitted group
1 - Make a rectangular opening in the base of the overhead cupboard or hood, leaving a minimum of 13 mm from the outer edges according to the dimensions indicated in the table.
2 - Drill a hole into the upper side of the cabinet in accordance with the dimensions of the duct used for both the evacuation and recirculation mode.
3 - Dismantle the ducting support (version with grill or version with filters), pulling the two pom- mels A (fig. 1) simultaneously:
a)Fixing frame with screws:
Fix the fitted group to the hood or cupboard, using the
b)Rapid fixing with side supports:
The device B is set up to deal with a panel thickness of from 15 mm to 30 mm. Insert the group into the opening until the two devices B connect. Lock the adjustment screw C until the fitted group adheres tightly to the surface (fig. 2).
4- Close the ducting support by pushing and connecting the two pommels A (fig. 3).
3.2 - Ducting or recirculation fitting
1- Ducting fitting:
a - The hood can be ducted to the outside using either a rigid or a flexible Ø 100 or 120 mm duct to be fixed with suitable clamps, not provided (fig. 2).
b - If the hood is provided with the charcoal filters fitted, the filters should be removed (see par.6.2).
2- Recirculation fitting:
a - When used in the recirculation mode, the charcoal filters must be fitted into the cooker hood (see par. 6.2).
b - The air is recirculated into the kitchen through the opening located on the upper side of the cabinet or of the hood (fig. 3).
3.3 - Electrical connection and working test
1- The safety measures 4.2, 4.3 and 4.4.
2- Once the electrical connection has been completed, check that the worktop illumination, motor and speeds work properly.
EN |
| 5 |
| 5 |