Smeg LBS65, LBS85 manual Installation, Removing packaging reinforcement, Adjusting the feet

Models: LBS65 LBS85

1 12
Download 12 pages 5.81 Kb
Page 3
Image 3

2 Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locks A Transportation safety bolts must

be removed before operating the washing machine! Otherwise, the machine will be damaged!

1. Loosen all the bolts with a spanner until they rotate freely (“C”)

2. Remove transportation safety bolts by turning them gently.

3. Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the appliance without the transportation safety bolts properly fixed in place!

Adjusting the feet

A Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1. Manually (by hand) loosen the lock nuts on the feet.

2. Adjust them until the machine stands level and firmly.

3. Important: Tighten all lock nuts up again.

Connecting to the water supply. Important:

The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1 MPa).

Connect the special hoses supplied

with the machine to the water intake valves on the machine.

• If you are going to use your double water-inlet machine as a single (cold) water-inlet unit, you must install the stopper*, supplied with your machine to the hot water valve.

• If you want to use both water inlets of the product, you can connect the hot water hose after removing the stopper and gasket group from the hot water valve.

* Applies for the products supplied with a blind stopper group.

• Models with a single water inlet should not be connected to the hot water tap.

When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be attached to the edge of a washbasin or bathtub. The drain hose should be firmly fitted into the drain as to not get out of its housing. Important:

The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.

The hose should be attached to a height of at least 40 cm, and 100 cm at most.

In case the hose is elevated after laying it on the floor level or close

to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out wet.

The hose should be pushed into the drainage for more than 15 cm. If it is

3- EN

Page 3
Image 3
Smeg LBS65 Installation, Removing packaging reinforcement, Adjusting the feet, Connecting to the water supply. Important

LBS65, LBS85 specifications

Smeg has long been synonymous with stylish kitchen appliances that combine cutting-edge technology with iconic design. Among its impressive range, the Smeg LBS85 and LBS65 stand out as sophisticated and functional built-in ovens suitable for modern culinary needs.

The Smeg LBS85, a larger model with an expansive capacity, is designed for passionate cooks who often entertain guests. With a generous 85 liters of space, it accommodates larger dishes with ease. In contrast, the LBS65, with a capacity of 65 liters, is perfect for smaller families or more intimate gatherings without compromising on performance.

Both ovens feature Smeg's advanced Thermo-ventilation system, which ensures even heat distribution throughout the cooking cavity. This technology minimizes hot spots and allows multiple dishes to be cooked simultaneously without flavor transfer. Smeg has also integrated a powerful fan that circulates hot air, promoting faster cooking times and energy efficiency.

In terms of user interface, both models are equipped with a digital control panel that provides precise temperature settings and cooking modes. Among the various cooking functions available are traditional baking, grilling, and a specialized pizza mode, which ensures the perfect crust every time. The intuitive settings allow home chefs to experiment with a variety of recipes while achieving professional results.

Cleaning is made simple with Smeg's Eco Clean technology, which utilizes the power of steam to loosen baked-on food residues. This feature significantly reduces the need for harsh chemicals, making it both an eco-friendly choice and a time-saver for busy individuals.

Another noteworthy characteristic of both the LBS85 and LBS65 is their sleek design. With elegant lines and a choice of finishes, including stainless steel and black, these ovens can seamlessly fit into various kitchen styles. The aesthetic appeal is complemented by solid construction, ensuring that they withstand the rigors of daily use.

Safety is also a primary consideration in the design of these ovens, featuring triple-glazed glass doors that maintain a cool exterior temperature. This ensures that both users and little ones can safely interact with the appliance.

In conclusion, the Smeg LBS85 and LBS65 provide a combination of high-performance cooking capabilities, elegant design, and user-friendly features. Whether you’re a culinary novice or a professional chef, these ovens are crafted to elevate your culinary experience and inspire creativity in the kitchen.