Smeg LS4647XH7 User instructions, End Program, Interruption Of A Program, To Change A Program

User instructions

END PROGRAM

When the program finishes, a buzzer sounds briefly and all the PHASES/PROGRAM lights

(8)flash.

Press any of the SELECTION PROGRAMS buttons (2), stops the light flashins, and the dishwasher is now ready to perform a new cycle; opening and shutting the door or switching the appliance off and on has the same effect.

INTERRUPTION OF A PROGRAM

In order to interrupt a running program it is necessary:

•press the START/PAUSE button (4), the light of the current phase goes out;

•keep the button pressed until the PHASES/PROGRAM lights (8) come on (confirmation buzzer).

TO CHANGE A PROGRAM

To change the running program it is necessary:

•to interrupt the running program (see “INTERRUPTION OF A PROGRAM”);

•select the new program;

•to press again the START/PAUSE button (4) to make start the new program.