User instructions
END PROGRAM
When the program finishes, a buzzer sounds briefly and all the PHASES/PROGRAM lights
(10)flash.
Press any of the SELECTION PROGRAMS buttons (2), stops the light flashins, and the dishwasher is now ready to perform a new cycle; opening and shutting the door or switching the appliance off and on has the same effect.
INTERRUPTION OF A PROGRAM
In order to interrupt a running program it is necessary:
•press the START/PAUSE button (5), the light of the current phase goes out;
•keep the button pressed until the PHASES/PROGRAM lights (10) come on (confirmation buzzer).
TO CHANGE A PROGRAM
To change the running program it is necessary:
•to interrupt the running program (see “INTERRUPTION OF A PROGRAM”);
•select the new program;
•to press again the START/PAUSE button (5) to make start the new program.
