User instructions

10
SETTING THE WASHING PROGRAM
To select the most suitable program for the dishes to be washed refer to the table below, which indicates the most appropriate program according to dish type and degree of soiling.
DURATION
CONSUMPTION
PROGRAM SELECTION TYPE AND GRADE DIRT PROGRESS
PROGRAM
MINUTES
(2)
WATER
LITRES (1)
POWER
KWh (2)
SOAK
PANS AND DISHES
AWAITING COMPLETION
OF THE LOAD Cold prewash 15' 6 0,03
LIGHT
DELICATE DISHES
WITH LIGHT DIRT

Wash at 45°C

Cold rinse

Rinse at 70°C

Dry

70' 15 1,15

ECO (*)
EN 50242
DISHES WITH
NORMAL DIRT, WASHED
IMMEDIATELY AFTER USE

Wash at 50°C

Cold rinse

Rinse at 66°C

Dry

180' ** **

AUTO
60 - 70
PANS AND DISHES
WITH NORMAL DIRT,
EVEN WITH DRIED-ON
RESIDUES

Cold prewash

Wash at 50°C

Wash at 65°C

Cold rinse

Rinse at 70°C

Dry

*** *** ***

ULTRA
CLEAN
VERY DIRTY PANS
AND DISHES, EVEN
WITH DRIED-ON RESIDUES

Prewash at 45°C

Wash at 70°C

2 cold rinses

Rinse at 70°C

Dry

115' 24 1,77

Only run the soak program with half loads.

The “3/1” (5) and DELAYED START (7) options cannot be used with the soak program.

(*) Reference program as per EN 50242 standard

(**) See energy label

(***) When the "AUTO 60-70" program is selected, the dishwasher recognises the type of dirt and

automatically adjusts the washing parameters as appropriate.

(1) Average power consumption with the softener set on level 2.

(2) The cycle duration and power consumption may vary according to the water and room

temperatures, and the type and amount of dishes.

The ULTRA CLEAN program terminate with an extra anti-bacteria rinse that ensures a further

reduction in the bacteria level. If the temperature falls during this stage of the program (e.g.

because the door is opened or due to a power blackout), the program lights (4) flash to warn that

the anti-bacteria effect is not guaranteed.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.