User instructions
DELAYING THE PROGRAM (on some models only) (available in all programs except the soak program)
The PROGRAM DELAY button (6) can be pressed to delay the start of the program by up to 12 hours. This means that the dishwasher can be operated at the time of day of your choice.
The first time the PROGRAM DELAY button (6) is pressed the display will show 12 hours, the maximum delay time before the program will start. Each subsequent time the button is pressed the delay time will be reduced, until the desired delay time is reached.
Particularly, on the display it will have the following indications.
Chosen the delay, proceed with the program start, press the button START/STOP (7) for same seconds until the clock symbol start to flaash.
The machine will perform a dish
In case you want to put to zero the “delay program” within the running program it is necessary:
•to press the START/STOP (7) button for some seconds until the clock symbol remain lid up on the display;
•to press the DELAY PROGRAM (6) more times until the reset of the delay program (clock symbol shut off);
•to press the START/STOP (7) button to make start the program.
N.B.: It is not possible to select the “delay program” when the program have already began.
"3/1" OPTION BUTTON (on some models only) (available in all programs except the soak program)
Pressing this button (5) activates the "3/1" option; the relative light comes on to confirm the selection.
This option is specifically for the use of tablet or powder detergents which already contain salt and rinse aid. If you decide to use a product of this kind, press the button to allow the dishwasher to vary the necessary parameters to ensure the best washing results by making full use of the quantities of detergent, salt and rinse aid these special products contain. At the end of the cycle, the appliance automatically presets for the use of conventional products.
14
