Smeg S20XMFR manual Mounting the oven

Models: S20XMFR

1 22

Page 5

The oven is designed for mounting into any piece of furniture as long as heat-resistant. Proceed according to the dimensions shown in Figures 1, 2.

Fixing is carried out using 4 screws at
the corners "C" of the oven door
frame, after removing the side panels
secured by the screws "A" and the
supports "B" as shown in figure 3. To
replace the side panels, take care to
engage the pins inside them correctly
with the supports "B", then retighten
the screws "A".	3.
	3.

Never use the oven door to lever the oven into place when fitting.

Avoid exerting too much pressure on the oven door when open.

Image 5

Contents

Contents Instructions for Safe and Proper USE IntroductionPlate Must not be Removed Installation Instructions for the installerElectrical connection This label must never be removedMounting the oven Instructions for the user Function Switch KnobDescription of Controls Front control panelThermostat Knob List of Functions Clock adjustmentElectronic Programmer Switching off the alarm Adjusting alarm volumeSemiautomatic cooking Automatic cookingChanging the set data Cancellation of set dataMinute Counter Oven light USE of the OvenCooling system Some models do not feature all accessories Available AccessoriesCooking Hints Function Switch Thermostat SwitchTraditional cooking multifunction models Hot-air cooking multifunction modelsHot-air grilling multifunction models Grill cooking225 200Defrosting multifunction models Function Switch Thermostat Switch in Position200 Spit roasting models with static ovenRecommended cooking table Traditional CookingHOT-AIR Cooking Cleaning stainless steel Cleaning and MaintenanceOrdinary Daily Cleaning Food stains or residuesDoor glass Cleaning of the ovenReplacement of light bulb Extraordinary MaintenanceOven door seal Removing