Smeg S709X-7 manual Self-cleaning liners only on some models, Using the self-cleaning liners

Models: S709X-7

1 25
Download 25 pages 62.85 Kb
Page 22
Image 22
7.3 Self-cleaning liners (only on some models)

Instructions for the user

Clean the oven grill and side guides with hot water and non-abrasive detergent. Rinse and dry.

The oven should be operated at the maximum temperature for about 15/20 minutes after using specific products, to eliminate the residues deposited inside the oven.

For easier cleaning, the door can be removed (see P. 8.2)

7.3 Self-cleaning liners (only on some models)

The oven is equipped with continuous self-cleaning enamelled liners. These liners make the oven easier to clean and ensure its efficiency over time.

7.3.1 Using the self-cleaning liners

Periodically, to prevent food residues and unpleasant smells from accumulating inside the oven, the appliance should be operated empty at temperatures of not less than 200°C for a time varying from 30 to 60 minutes, in order to allow the self-cleaning liners to oxidise the residues present; when the oven has cooled, these will then be removed with a damp sponge

7.3.2 Looking after the self-cleaning liners

The liners should not be cleaned with abrasive creams or ordinary detergents. Use a damp sponge only, so as not to damage the special characteristics of the enamel which coats the liners.

7.3.3Assembling the self-cleaning liners

1.Remove all accessories from the oven;

2.Remove the side supports (fig.1);

3.Extract the side liners “F” and “G”(fig. 2);

4.Remove the back panel “A” after undoing the threaded ring-nut “C” (fig. 2).

5.Reassemble the panels, restoring them to their original position. Incorrect installation of the rear panel can lead to uneven cooking.

49

Page 22
Image 22
Smeg S709X-7 Self-cleaning liners only on some models, Using the self-cleaning liners, Assembling the self-cleaning liners