Smeg SA9066CER Wall fixing where applicable, Mounting the rear top skirtboard where applicable

Instructions for the installer

Complete wiring up to power supply with an appropriately rated five-core plug (see data plate) or, in case of operation from a 220-240Vpower supply, with a three-core plug. Make sure that plug and wall socket are of the same type and are in conformity with regulations in force. Make sure that the appliance is properly earthed. Before powering, check that the power line is properly earthed. Avoid using adapters or shunters.

The manufacturer declines all responsibility for damage to persons or things caused by non- observance of the above prescriptions.

13.2 Wall fixing (where applicable)

In order to prevent accidentaltipping of the appliance, for example by a child climbing onto the open oven door, a stabilizing means must be installed. Please refer to instructions for installation.

•Stretch out the chain attached to the cooker horizontally so that the other end touches the wall.

•Mark the wall in the position where the hole is to be drilled.

• Drill the hole, insert the finned dowels and attach the chain.

•Move the cooker up against the wall.

13.3 Mounting the rear top skirtboard (where applicable)

•Loosen nuts B.

•Position the skirt above the top, taking care to align

pins C with holes D.

• Secure the skirt to the top by tightening screws A.

914773013/ B

18