Instructions for the user
4.1.6Electronic circuit board thermal protection
The appliance is equipped with a device which constantly measures the temperature of the electronic circuit board.
If the temperature should exceed preset values, the device will trigger specific functions to reduce the temperature and allow the ceramic hob to keep operating correctly.
The following table lists the automatically triggered procedures and the relative trigger temperature:
| Operation |
| Trigger |
|
|
| temperature |
|
|
|
|
Fan switches on at low speed | 50° C | ||
|
|
|
|
Fan switches on at high speed | 60° C | ||
|
|
|
|
Fan switches back to low speed | 55° C | ||
|
|
|
|
Fan switches off | 45° C | ||
|
|
|
|
Operating power is reduced from Power function to 9 | 76° C | ||
|
|
|
|
Operating power is reduced by one point for each cooking | 85° C | ||
| zone |
|
|
|
|
|
|
All cooking zones switch off | 90° C | ||
|
|
|
|
Cooking zones switch back on at reduced power | 85° C | ||
|
|
|
|
All cooking zones return to normal operation | 80° C |
The power displays on the hob flash to signal all operations of this kind
4.1.7Ceramic hob thermal protection
Each cooking zone is equipped with a device which constantly measures its temperature.
If the temperature should exceed preset values, the device will trigger specific functions to reduce the temperature and allow the ceramic hob to keep operating correctly.
The following table lists the automatically triggered procedures and the relative trigger temperature:
| Operation |
| Trigger |
|
|
| temperature |
|
|
|
|
Operating power is reduced from Power function to 9 |
| 250° C | |
|
|
|
|
Operating power is reduced by one point |
| 280° C | |
|
|
|
|
Cooking zone switches off |
| 300° C | |
|
|
|
|
Power returns to set value |
| 250° C |
The power displays on the hob flash to signal all operations of this kind
Take care not to spill sugar or sweet mixtures on to the cooking hob when hot. Never place materials or substances which may melt (plastic or aluminium foil) on to the cooking hob. In the event, promptly switch off and remove the molten material with the scraper provided while the top is still warm to prevent it from being damaged. Failure to instantly clean the glazed ceramic hob could lead to encrustations which are impossible to remove once the hob has cooled down.
Important.
Beware of children in the vicinity as the signal lamps indicating residual heat are out of sight to them. In fact, even after having been turned off, the cooking hob remains hot for a certain period of time.
Make sure that children never touch the cooking hob.
32
