Instructions for the user

14.2 Gas connection

This appliance is suitable for installation with Natural Gas or LPG (propane). Refer to page 12 for the relevant burner pressure and appropriate injector sizes. When the appliance is to be connected to Natural Gas then the pressure regulator supplied must be fitted to the gas inlet. A test point (for checking the gas pressure) is supplied either with the regulator or as a separate fitting in the case of LPG (propane) appliances.

Connection of the appliance to the gas supply must be in accordance with the requirements of AS5601. A ½” BSP connector at the inlet is recommended and the gas supply line to the appliance must be of adequate length to allow sufficient withdrawal of appliance for service or disconnection and be annealed copper pipe.

The cooker must be installed with provision to allow the gas to be turned off and disconnected for servicing and removal of the appliance as required from the gas supply.

Before the cooker is operated make certain all relevant parts are placed in the correct position.

When the installation is completed the installation connections of cooker will require to be leak tested, the burner operating pressure and flame checked and adjusted.

Warranty service calls do not cover these adjustments!

To check the operating pressure of the appliance it is recommended at least 2 large size burners are used. Ensure appliance is secured to wall when installation is completed.

N.G. The regulator supplied must be fitted to the ½ BSP thread at the rear of the appliance. An approved manual shut-off valve must be installed. The N.G. regulator must be checked and adjusted to 1.0 kPa after installation.

L.P.G. Can be connected to the inlet fitting directly. The pressure must be checked to ensure it is operating at 2.75 kPa. A separate test point fitting must be installed between the piping & the appliance for the pressure to be checked to ensure it is operating at 2.75 kPa.

14.3 Room ventilation

Caution – This cooker may only be installed and operated in rooms permanently ventilated in accordance with current regulations. For proper operation of a gas appliance it is essential for the air necessary for combustion of the gas to be able to flow naturally into the room. Air must flow directly into the room through openings in its outside walls.

This (these) opening (s) must have a free passage cross-section of at least 100 cm 2, or 200 cm 2 for appliances not equipped with gas safety device. These openings must be constructed so that they cannot be obstructed indoors or outdoors, and should preferably be close to the floor on the side opposite to the combustion gas discharge point. If it is not possible to make the openings in the room where the cooker is installed, the necessary air may be taken from an adjoining room, proveded it is not a bedroom or a room with fire risk.

18

Page 15 Page 17
Page 16
Image 16
Smeg SNZ60EVX manual Gas connection, Room ventilation
Page 15 Page 17

SNZ60EVX specifications

The Smeg SNZ60EVX is a remarkable addition to Smeg's range of stylish and functional kitchen appliances, specifically designed for the modern home. This built-in oven epitomizes a combination of Italian design and cutting-edge cooking technology, making it a coveted choice for both amateur cooks and professional chefs alike.

One of the standout features of the Smeg SNZ60EVX is its multifunction cooking capabilities. The oven offers multiple cooking modes, including conventional cooking, fan-assisted cooking, and grilling, allowing users to prepare a diverse array of dishes with precision and ease. The fan-assisted mode ensures even heat distribution, so food cooks uniformly, while the grill function perfectly browns ingredients to achieve that desired crispiness on top.

The oven boasts a generous capacity, providing ample space for large meals and multiple dishes to be cooked simultaneously. Its interior is designed with easy-to-clean enamel surfaces that help reduce the build-up of grease and food residue, ensuring maintenance is straightforward and hassle-free.

Another highlight of the Smeg SNZ60EVX is its innovative Pyrolytic cleaning function. This self-cleaning feature heats the oven to extremely high temperatures, incinerating any leftover food particles to ash, which can then be easily wiped away. This technology not only saves time and effort but also ensures that the oven remains hygienic and in top condition with minimal user intervention.

The oven is equipped with an intuitive digital display and user-friendly controls, making it simple to navigate through its various settings. The advanced cooking functions include a timer, temperature probe, and customizable presets for your favorite recipes, which enhances the overall cooking experience.

Design-wise, the Smeg SNZ60EVX exudes elegance, featuring a sleek stainless steel finish that complements any kitchen decor. Its compact size makes it easy to integrate into kitchen cabinetry, while the modern aesthetic adds a touch of sophistication.

Energy efficiency is another key characteristic of the SNZ60EVX. With its A+ energy rating, it not only helps save on utility bills but also promotes sustainable cooking practices, aligning with the growing trend of environmental responsibility among consumers.

In summary, the Smeg SNZ60EVX is a skilfully designed built-in oven that combines aesthetic appeal with advanced cooking technology. Its multifunctional capabilities, ease of cleaning, energy efficiency, and user-friendly features make it an ideal choice for anyone looking to elevate their culinary adventures in style and comfort.
Top Page Image Contents