Smeg ST1105, ST1107S instruction manual

User instructions

After using the table to identify the most appropriate washing program:

•press the ON/OFF button (1) and wait for the PROGRAM INDICATOR LIGHT (2) to illuminate;

•keep pressing the PROGRAM SELECTION button (3) until the indicator light corresponding to the desired program illuminates;

•close the door; after about 2" the program will start. While it is in progress, the relative LIGHT will flash (indicating that the program is being executed).

	PROGRAMME,		LOAD CROCKERY	PROGRAM	DURATION	CONSUMPTION
NUMBER & SYMBOL			AND CUTLERY	PROGRESS	MINUTES	WATER	POWER
					(2)	LITRES (1)	KWh (2)
1		SOAK	Pans and dishes	Cold prewash	9'	5	_
			awaiting
			a further wash
			Wash immediately	Wash at 45°C
2				Cold rinse	59'	12	0,90
		DELICATE	after use for dishes
				Rinse at 68°C
			with light dirt
				Dry
			Wash immediately	Wash at 50°C
3		ECO (*)		Cold rinse	125'	13	1,01
			after use for dishes
		EN 50242		Rinse at 65°C
			with normal dirt		(**)
				Dry
				Cold prewash
4		NORMAL	Dishes	Wash at 65°C	80'	17	1,20
				Cold rinse
			with normal dirt	Rinse at 68°C
				Dry
				Prewash at 45°C
5		INTENSIVE	Very dirty pans and	Wash at 70°C	105'	20	1,50
			dishes (except	2 cold rinses
			delicate items)	Rinse at 70°C
				Dry

Only run the soak program with half loads.

(*) Reference program as per EN 50242 standard.

(**)The duration of the ECO program (EN 50242) for AAA moodels (see energy label) is 175'.

(–) Not present.

(1)Average power consumption with the softener set on level 2.

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.