Switch Setting models without display | Smeg ST1124S-1 manual

User instructions

SWITCH SETTING (models without display)

According to the machine model, the selector which acts on the adjustment may be located:

•inside the plastic locking ring located on the right-handside, inside the dishwasher;

•inside the water softener, just below the cap.

Both allow for adjustment to 5 settings:

WATER HARDNESS TABLE

	WATER HARDNESS					SETTING

German Degrees (°dH)			French Degrees (°dF)
German Degrees (°dH)			French Degrees (°dF)

0	- 4		0	- 7		Setting N. 1 NO SALT

5 - 15			8 - 25			Setting N. 1

16	- 23		26	- 40		Setting N. 2

24	- 31		41	- 60		Setting N. 3

32	- 47		61	- 80		Setting N. 4

48	- 58		81 - 100			Setting N. 5

Contact your local water board for information on the hardness of your water supply.

Image 10

Smeg ST1124S-1 instruction manual Switch Setting models without display

Contents

Guide for Using the Dishwasher and the Washing Programs Contents Description of the controls Upper panel 1 Option Button Setting the Washing Program and Switching on1 Option Light Programme Number & Symbol Load Crockery Cutlery Table for Certification Bodies Cancelling the Current ProgramWashing programs Reference standard Selecting Half Load Wash on some models only Extra Programs Delaying the Program 1 Option Button Electronic Setting models with display Adjusting the Water Softening SystemWater Hardness Table Switch Setting models without display END of Cycle Removing the Dishes Troubleshooting Fault Description Water intake system malfunction For Cleaning Dishwashers Contents Uses Other than Those Described Above Safety and operating instructionsNever be Removed Safety instructions Aquastop Models Appliance Installation instructions Installation and hook-up Water supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply Cord For Great Britain only When Cleaning and Maintaining the ApplianceFuse replacement This Appliance Must be Earthed Using the water softening system Operating instructions Using the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AID Adding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Upper Basket Loading the Lower Basket Lower Basket½ Load Cutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketPush-button version Cleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Avoid the use of acidic or abrasive detergents Cleaning the Filter Unit Prolonged Disuse Before Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598