Smeg ST93P manual Operating instructions, User instructions, Adding The Rinse Aid

Models: ST93P

1 35
Download 35 pages 52.75 Kb
Page 19
Image 19
4. Operating instructions

User instructions

4. Operating instructions

Once the dishwasher has been correctly installed, prepare for use as follows:

Add the rinse aid and detergent.

4.1Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

ADDING THE RINSE AID

The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door.

Open the door.

Rotate the container cap anticlockwise by ¼ of a turn and remove it.

Add the rinse aid until the container is full (approximately 140 cc). The optical level indicator on the side of the cap should be completely obscured. Refill the rinse aid when the optical level indicator becomes clear again, or when the rinse aid warning light illuminates.

Replace the cover and turn it in a clockwise direction.

Use a cloth to remove any spillage of rinse aid which might lead to the formation of excess foam.

20

Page 19
Image 19
Smeg ST93P Operating instructions, User instructions, Using the rinse aid and detergent dispensers, Adding The Rinse Aid