User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard |
| EN 50242 |
|
|
|
Reference program |
| BIO |
|
|
|
Load |
| Depending on the models 12 or 14 |
|
|
|
Type of detergent |
| B |
|
|
|
Amount of detergent |
| 12 |
|
|
|
Rinse aid setting | 5/6 |
1.2 Washing programs
Before starting a washing program make sure that:
•The water supply tap is open.
•The correct amount of detergent has been added to the dispenser.
•The baskets have been correctly loaded.
•The spray arms are able to rotate freely and without obstruction.
•The dishwasher door is securely closed.
CANCELLING THE CURRENT PROGRAM
•To cancel the currently selected program, open the door and hold down the PROGRAM SELECTION (3) button for a few seconds until the indicator lights for programs 4 and 5 illuminate simultaneously.
•Close the door.
•After approximately 1 minute the dishwasher will advance to the end of cycle.
CHANGING THE PROGRAM
To change the program in progress, simply open the door and select a new program. When the door is closed the dishwasher will automatically select the new program.
