21 |
22 |
23 |
24 |
25 |
MAINTENANCE
15
CLEANING THE WASHING MACHINE
The washing machine has been specifically designed to reduce maintenance to a minimum. Nevertheless, it is important that it is cleaned regularly.
Before cleaning, make sure that the appliance has been disconnected from the power supply and that the water supply valve has been closed.
The external structure and the parts of the washing machine in plastic must be cleaned with a soft damp cloth only.
WARNING!! Never use chemicals, abrasive products, alcohol, soap, petrol or other solvents to clean the appliance as these may cause damage. (f g. 21)
After washing, leave the door open for a short time to allow rubber parts to dry.
Periodically wash out the detergent compartments. To do this, remove the detergent compartment and rinse it under running water (fig. 22). Then replace it.
REMOVING THE DETERGENT DRAWER
open the detergent drawer;
press on the word “PUSH” with the right hand and pull out the drawer with the left hand (fig. 23).
CLEANING THE FILTER
WARNING!! Before starting the operations described belo w, make sure that the washing machine is empty. Do not remove the f lter while the washing mac hine is running, or when full of wa- 
ter.
Place a cloth or tray under the filter to collect any water that may still be inside Open the filter door, unscrew the filter and remove it by turning it in an anticlockwise direction (fig.
The filter must be cleaned periodically.
Rinse the filter under running water to eliminate any residues. Replace the filter by screwing it in clockwise, making sure it closes and seals properly.
GB
