To Custom Program User U1 thru U4, Select

To Custom Program User (U1 thru U4):


Step 1:	Refer to Select a Program. Repeat Step 1 & 2. Press and release the
	SELECT	key past P4 to user U1. There are 4 available.
Step 2:	Use the FASTsSLOWt speed keys to make a speed entry. Display will
	show desired speed and U1-1. Use the blue incline Up + / Down - keys to
	make an incline entry.
Step 3:	Press and release the Shift			s	key to advance to segment 2. Display will

	show U1-2. Use FASTsSLOWt keys to adjust to desired speed for that
	segment. Use the blue incline Up + / Down - keys to make an incline entry.
Step 4:	Repeat above procedures until all 10 segments are programmed.
Step 5:	Press and release the					key to begin exercise. Exercise
			START BELT

is now held in memory unless changed or erased.

Note: You may adjust speed and or incline anytime during a workout. These values will not be held in memory.

Follow instructions on page 9 To Review/Change a Program. Any speed and or incline change before belt movement is held in memory.

STEP 1:	Choose the user program to be erased. U1 for example.
STEP 2:	Press both sShift	s	keys at the same time for 3 seconds.

cline values will be cleared and cannot be recovered.

Speed and in-

Smooth 9.6 2/06/01