USB Hub with Integrated 10/100 Ethernet Controller
Datasheet
Chapter 1 Introduction
1.1Block Diagram
LAN9514
JTAG | TAP |
|
| EEPROM |
| Controller | USB 2.0 | 10/100 | Controller |
|
| Ethernet |
| |
|
| Hub |
| |
USB | Upstream | Controller | Ethernet | |
DP/DM |
| |||
| USB PHY |
|
| PHY |
EEPROM
Ethernet
Downstream | Downstream | Downstream | Downstream |
USB PHY | USB PHY | USB PHY | USB PHY |
USB | USB | USB | USB |
DP/DM | DP/DM | DP/DM | DP/DM |
Figure 1.1 Internal Block Diagram
1.1.1Overview
The LAN9514 is a high performance
The LAN9514 contains an integrated USB 2.0 hub, four integrated downstream USB 2.0 PHYs, an integrated upstream USB 2.0 PHY, a 10/100 Ethernet PHY, a 10/100 Ethernet Controller, a TAP controller, and a EEPROM controller. A block diagram of the LAN9514 is provided in Figure 1.1.
The LAN9514 hub provides over 30 programmable features, including:
PortMap (also referred to as port remap) which provides flexible port mapping and disabling sequences. The downstream ports of the LAN9514 hub can be reordered or disabled in any sequence to support multiple platform designs’ with minimum effort. For any port that is disabled, the LAN9514 automatically reorders the remaining ports to match the USB host controller’s port numbering scheme.
PortSwap which adds
PHYBoost which enables four programmable levels of USB signal drive strength in USB port transceivers. PHYBoost attempts to restore USB signal integrity that has been compromised by system level variables such as poor PCB layout, long cables, etc..
Revision 1.0 | 6 | SMSC LAN9514 |
| DATASHEET |
|