USB 2.0
Datasheet |
|
|
4.2.1.11 | Register 0Ah: Port Disable For Self Powered Operation | |
|
|
|
BIT |
|
|
NUMBER | BIT NAME | DESCRIPTION |
|
|
|
7:0 | PORT_DIS_SP | Port Disable |
|
| is available, ‘1’ = port is disabled. |
|
| During |
|
| (PRTMAP_EN='0'), this selects the ports which will be permanently |
|
| disabled, and are not available to be enabled or enumerated by a Host |
|
| Controller. The ports can be disabled in any order, the internal logic will |
|
| automatically report the correct number of enabled ports to the USB Host, |
|
| and will reorder the active ports in order to ensure proper function. |
|
| Bit 7= Reserved, always = ‘0’ |
|
| Bit 6= Reserved, always = ‘0’ |
|
| Bit 5= Reserved, always = ‘0’ |
|
| Bit 4= Reserved, always = ‘0’ |
|
| Bit 3= Reserved, always = ‘1’ |
|
| Bit 2= 1; Port 2 is disabled |
|
| Bit 1= 1; Port 1 is disabled |
|
| Bit 0= Reserved, always = ‘0’ |
|
|
|
4.2.1.12Register 0Bh: Port Disable For Bus Powered Operation
BIT |
|
|
NUMBER | BIT NAME | DESCRIPTION |
|
|
|
7:0 | PORT_DIS_BP | Port Disable |
|
| is available, ‘1’ = port is disabled. |
|
| During |
|
| (PRTMAP_EN='0'), this selects the ports which will be permanently |
|
| disabled, and are not available to be enabled or enumerated by a Host |
|
| Controller. The ports can be disabled in any order, the internal logic will |
|
| automatically report the correct number of enabled ports to the USB Host, |
|
| and will reorder the active ports in order to ensure proper function. |
|
| When using the internal default option, the PRT_DIS[1:0] pins will disable the |
|
| appropriate ports. |
|
| Bit 7= Reserved |
|
| Bit 6= Reserved |
|
| Bit 5= Reserved |
|
| Bit 4= Reserved |
|
| Bit 3= Reserved, always = ‘1’ |
|
| Bit 2= 1; Port 2 is disabled |
|
| Bit 1= 1; Port 1 is disabled |
|
| Bit 0 is Reserved, always = ‘0’ |
|
|
|
SMSC USB2512A | 19 | Revision 1.96 |
| DATASHEET |
|