Snapper 1695295 installation instructions Installation Instructions, Light Kit

Installation Instructions

Light Kit

Part No. 1695295

For Axion and 150Z Zero Turn Models

1

3

		1
2	4	2	4
			5
		3

6

Kit Contents:
Ref.	Part No.	Qty.	Description
1	N/A	2	NUT, Hex, 5/16-18
2	N/A	2	LOCKWASHER, 5/16
3	N/A	2	CARRIAGE BOLT, 5/16-18 x 1
4	1726801	2	HEADLIGHT ASSEMBLY,
7			(Includes Ref. Nos. 1, 2, & 3)
5	1716951	1	SWITCH, Headlight
6	2172434	2	CLIP, Wire
7	1726796	1	HARNESS, Wire
Figure 1. Contents
WARNING
Before beginning any service work turn off the	B
PTO, set the parking brake, turn off the ignition,		C
remove the key, and disconnect the spark plug			D
wire(s).
A
INSTALLATION
1. Remove 1/4-20 x 5/8 capscrews (A, Figure 2) and			F
cover (B).
2. Install light assembly (F) and secure with 5/16 lock-			E
washer (D) and 5/16-18 nut (C).
3. Reinstall cover (B) and secure with 1/4-20 capscrews
(A).
4. Repeat steps 1 through 3 for other side of unit.
Figure 2.	Light Installation
A. Capscrews, 1/4-20 x 5/8
B. Cover
C. Nut, 5/16-18
D. Lockwasher, 5/16
E. Bracket
F. Light Assembly

1