Mower Deck Removal & Installation

44” Snapper

Models

WARNING

Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower.

Removing the Mower Deck

Note: Units with electric height of cut, unplug tractor wire harness from deck harness before removing deck.

1.Park tractor on a hard, level surface such as a con- crete floor. Turn off PTO switch and engine, remove the key and apply parking brake.

2.Place mower in the lowest cutting position using the mower height adjuster.

3.Place the attachment lift in the highest position.

4.Disconnect the safety clips (A & H, Figure 9) and washer (G) from the lower hanger (E). Remove upper hanger (B) from lift post (F). Connect upper hanger (B) to lower hanger (E) using safety clip (A) to prevent misplacing or losing parts. Repeat on other side.

5.Place the attachment lift in the lowest position.

6.Remove lift chain (D) from lift hook (C). Repeat on other side.

CAUTION

The muffler and surrounding areas may be hot.

7.Remove belt from PTO pulley (B, Figure 7).

8.Turn wheels straight ahead. Pull back on spring- loaded lever (B, Figure 8) and lift mower hitch off of the tractor brackets.

9.Turn wheels fully left, and slide mower deck out right side of tractor.

Installing the Mower Deck

1.Park tractor, shut off PTO and engine, remove the key and apply parking brake. Turn the wheels fully to the left.

2.Place mower height adjuster (B, Figures 5) in the lowest cutting position. Place the mower lift lever in the lowest position, also. Slide mower deck under right side of tractor so that mower hitch is aligned with the front tractor hitch.

Operating the Tractor

F

H

 

B

C

 

G

D

 

E

A

Figure 9. Lift Arms

(Viewed from underneath left side of tractor)

A. Safety Clip

E. Lower Hanger

B. Upper Hanger

F. Post on Lift Hook

C. Lift Hook

G. Washer

 

D. Lift Chain

H. Safety Clip (Some Models)

Center

 

 

 

D

 

Conquest / 1700 /

A

C

2700 / 400

 

B

 

Figure 10. Upper Hanger

 

 

A. Upper Hole

C. Lift Hook

 

B. Lower Hole

D. Long Hub

 

3.See Figure 8. Turn wheels straight. Pull back on the spring-loaded lever (B) while lifting up on the mower hitch. Install mower hitch onto tractor hitch brackets

(A). When properly installed, the spring-loaded lever should seat fully underneath the brackets.

4.See Figure 9. Connect the lift chain (D) to the lift hook (C). Repeat on other side.

5.Place the attachment lift in the highest position.

6.Disconnect the safety clip (A & H, Figure 9) from the upper hanger (B) and lower hanger (E) if still con- nected from storage. Slide upper hanger (B) over post on lift hook (F). The long hub (D, Figure 10) on the upper hanger must face toward center. Connect hole on upper hanger (B, Figure 9) to post on lower hanger (D). Secure with washer (G) and safety clip (A & H). Repeat on other side.

Note: Use lower hole for Conquest / 1700 / 2700 / 400 as shown in figure 10.

7.See Figure 7. Move idler arm (A) to relieve belt ten- sion. Install belt onto the PTO pulley (B).

Note: Units with electric height of cut, connect tractor wire harness to deck harness.

19

Page 21
Image 21
Snapper 1700, 2700, 400 manual Snapper Models, Upper Hanger Upper Hole Lift Hook Lower Hole Long Hub

1700, 2700, 400 specifications

The Snapper series of mowers, including the Snapper 1700, 2700, and 400 models, represents a blend of power, efficiency, and innovative technology designed for lawn care enthusiasts and professionals alike. Each model offers unique features tailored to meet diverse mowing needs, ensuring top performance and ease of use.

The Snapper 1700 is ideal for residential yards and smaller properties. It is equipped with a reliable engine that delivers smooth, consistent power to tackle various grass types. The mower features a compact design, making it easy to maneuver around obstacles such as flower beds and trees. One of its standout attributes is the innovative easy-to-use height adjustment mechanism, allowing users to effortlessly change cutting heights to best suit their lawn conditions. Additionally, the Snapper 1700 boasts a robust cutting deck that ensures an even cut, resulting in a professional-grade finish.

The Snapper 2700 is a step up from the 1700, designed for users who require more power and capacity. This model comes with a larger cutting width, allowing for quicker mowing of expansive lawns. Enhanced features include an advanced mower deck technology that optimizes grass clipping discharge, helps to reduce clumping, and improves overall efficiency. The Snapper 2700 also incorporates ergonomic controls, providing comfort during prolonged use, and its durable construction ensures longevity. Furthermore, its rear-wheel drive system enhances traction, particularly on uneven terrain.

For those managing larger properties or commercial landscapes, the Snapper 400 offers premium performance and advanced technology. This model features a high-powered engine for maximum cutting performance, even in challenging conditions. The Snapper 400 is equipped with an intuitive digital display, providing essential information such as battery life and maintenance reminders, ensuring optimal performance over time. The mower's heavy-duty frame and reinforced deck enhance durability, making it suitable for rigorous tasks. It also boasts an innovative mulching capability, enabling users to finely chop grass clippings and return them to the soil as nutrient-rich mulch.

In summary, the Snapper 1700, 2700, and 400 models cater to a wide range of lawn care needs, from small yards to expansive landscapes. Each model combines innovative features, advanced technology, and durable construction, making them reliable choices for homeowners and professionals seeking superior mowing solutions.