Snapper 2730 installation instructions Installation Instructions, Parts List, Awarning

PARTS LIST

Mounted on mqyer deck. A

hardware for, 48” mower.

NOTE

Deflector brace (F, figure 1) and adaptor hold- down (R) are preassembled to adaptor (0) with rivets (G).

Figure 1.

Ref.	Qty.	Description			Part No.
A	1	Nut, 3/8-l	8		1816950
8	1	Lockwasher. 3/S			1916965
c	1	Washer, 3/S			1919384
D	1	Spacer			153081
E	1	Bolt, Carriage, 3/8-l 6		x 1	1917378
		(42”)
	1	Bolt, Carriage. 3/8-16x l-114			1923220
		(48”)
F	1	Deflector	Brace		1700260
G	6	Rivet			928706
H	1	Nut, 5/16			1960251
I	1	Washer, l/2			J 960027
J	1	Bolt. Carriage, 3/S-16		x 7/S	1931349
K	1	Spring Latch			1678786
L	1	Nut. 5/16			1917372
M	1	Lockwasher,	5/l 6		1917356
N	1	Washer. 5/l 6			1917642
0	1	Adaptor Assembly (Inch. F. G and RI			1678667
		42”
	1	48”			1678668
P	1	Washer. 7116			1817378
cl	1	Bolt, Carraige, 5/16-18		x 1	1931335
R	1	Hold-down, Adaptor			1679548

INSTALLATION

INSTRUCTIONS _

VAClJubI COL&CTQ~P @APTfJe~

MFG. NO. 1691170 FOR 42”MOWERS MFG. NO. 1691009 & 1691182

MFG. NO. 1691171 FOR 48” MOWERS MFG. NO. 1690986 & 1691193

AWARNING

The adapter is part of the YBCUU~ collector system. Do not operate unless the adapter and entire YBEUU~ collector are installed. If vacuum collector is removed, remove the adapter and be sure mower deflector is In original position.

AWARNING

Shut off tractor engine and remove key before

installing or removing the adapter.

INSTALLATION

1. Refer to figure I to take inventory of required parts.

2. Attach the latch (K, figure 1) to theadapterwith5/ 16- ~ 18 x 1 carriage bolt (Q), 7/ 16 x I washer (P), 5/ 16 washer (N), 5/ 16 lockwasher (M) and 5/ 16 nut (L).

3.Install the spacer (D,‘figure l), with hardware shown, in hole (A, figure 2) in mower deck. Remove existing hardware. For the 42” adapter, use a 3/8-16 x 1 carriage bolt. For the48”adapter, usea3/8-16x l-1/4 carriage bolt. For the 42” adapter, use a 3/ 8 washer (B, figure l), 3/8 lockwasher (M) and 3/8 nut (N) supplied. For the 48” mower, use existing washer and nut and the 318 washer (B) supplied.

Figure 2.
A.	Install	Spacer
8.	InStall	Bolt	F&M	- 1	6 7 9 2	7 2
C. Stone Guard
			PRlNTED	IN	U.S.A.
					878