Snapper 281023BVE manual Main Case & L.H. Fender, Item, Part No, Description, Footnotes, Manual No

MAIN CASE & L.H. FENDER

Item	Part No	Qty	Description	Note
1	7028990	1	COVER, Battery
2	7028989	1	COVER, Switch
3	7073268	1	COVER, Solenoid
4	7074210	1	BRACKET, Belt Adjuster
5	7091198	2	SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap
6	7090358	1	SCREW, 5/16-24 x 2-1/2” Hex Head Cap, GR 5
7	7031100	1	TUBE CLAMP
8	7010969	2	NUT, 5/16-24 Flange Lock (Large)
9	7074650	1	BUSHING, Pivot	replaces 7022509 (voided)
10	7053697	1	WELDMENT, Main Case (Standard) (shown)
10	7053698	1	WELDMENT, Main Case (Commercial) (not shown)	used on E331523KVE Model
				only
11	7034299	2	WING, Rear
12	7028200	2	SWIVEL, Adjustable
13	7091503	2	HAIR PIN, 3/32 x 1-1/2”
14	7090793	4	SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
15	7011791	4	RETAINER, 5/16” Bolt
16	7091296	4	WASHER, 5/16” Flat
17	7091315	7	WASHER, .32 x .58 x .08 Split Lock
18	7091297	7	NUT, 5/16-24 Hex, GR 5
19	7090595	2	BOLT, 5/16-18 x 3/4” Hex Flange Lock, GR 5
20	7024998	3	PLUG, 1” Hole	Used on Euro models only
21	7090238	4	SCREW, 5/16-24 x 1” Hex Head Cap, GR 5
22	7077692	4	BOLT, M8-1.25 x 25mm, Self-Tap (Kohler)
23	7074946	1	PLATE, Engine (Kohler Engine)	used on E331523KVE Model
				only
24	7030798	2	BUMPER, Rear
25	7036367	1	BUMPER (1-Piece) (33” Deck)
26	7090484	4	SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap	or 7091506
27	7010153	2	CAP, Bumper
28	7090188	2	WASHER, 11/32” Flat
29	7090361	14	SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap	or 7091867
30	7090391	1	WASHER, 5/16” Internal Tooth Lock
31	7012652	1	CLIP, Wire
32	7090206	1	SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
33	7091513	4	SCREW, 5/16-24 x 1-3/4” Hex Head Cap, GR 5
34	7091272	7	FASTENER, 1/4” Ratchet
35	7047189	1	BRACKET, Drive Support
36	7090585	6	NUT, 5/16-18 Hex Flange Lock, GR 5

Footnotes:

REAR ENGINE RIDER		Manual No.	7006152
SERIES 23	11	TP 400-5003-5-RE-N