Snapper 500Z manual Specifications, ENGINE 26 HP Briggs & Stratton, Chassis, Dimensions

Specifications

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

ENGINE:

26 HP Briggs & Stratton

Make	Briggs & Stratton
Model	44P777-0124-G1
Horsepower	26 @ 3600 rpm
Displacement	44.2 Cu. in (724 cc)
Electrical System	12 Volt Starter, 16 amp. Alternator,
	Battery: 340 CCA
Oil Capacity	2.0 US qt.. (1.9 L) w/ Filter

CHASSIS:

Fuel Tank	Capacity: 8 Gallons (30,3 L)
Rear Wheels	Tire Size: 20 x 8.00	-10 (48” Model)
	Inflation Pressure: 15 psi (1,03 bar)
Front Wheels	Tire Size: 11 x 4.00	- 5
	Inflation Pressure: 40 psi (2,76 bar)

TRANSMISSIONS:

HydroGear ZL-KMEF-3L7C-1LLX (LH)

HydroGear ZL-GMEF-3L7B-1LLX (RH)

Type	ZT2800
Hydraulic Fluid	SAE 20W-50 motor oil
Speeds	Forward: 0-7 MPH (0-11,27 km/h)
@ 3400 rpm	Reverse: 0-5 MPH (0-8.05 km/h)
Continuous Torque	180 ft. lbs. (244 N.m.)
Output
Maximum Weight	440 lbs. (200 Kg) per axle
on Axle

DIMENSIONS:

Overall Length:	68” (173 cm)
Overall Width
48” Model:	49” (125 cm)
Height:	43” (109 cm)
Weight (apx.):	750 lbs. (340 kg)

Engine Power Rating Information

The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.

Specifications

41