IMPORTANT: This mower is shipped with the recycling plug installed. The plug must be removed if the mower is operated with grass catcher. DO NOT start or operate this mower without the plug or the entire grass catcher in place.
STEP 9: With grass catcher and catcher frame assembly upside down (plastic bottom turned up), insert bag frame assembly into catcher as shown in Figure 4. Fasten "C" shaped plastic edge strip located on front of bag around frame assembly on all four sides. Make sure edge strip is fastened securely.
|
| BOTTOM OF |
CATCHER |
| |
| GRASS | |
HANDLE |
| CATCHER |
|
|
|
|
| EDGE STRIPS: | |
SLIDE FRAME ALL | |||
| ATTACH STRIPS TO | ||
THE WAY INTO |
| FRAME. | |
GRASS CATCHER |
|
| |
|
|
| |
|
|
|
FIGURE 4
STEP 10: Install grass catcher to mower as follows: Lift discharge door, then grasp handle and hold grass catcher/frame up while placing rod ends over tabs at rear of mower deck. Release discharge door. See Figure 5.
ROD |
|
|
|
|
| DISCHARGE DOOR | |||
ENDS |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| TABS |
|
|
|
|
|
|
GRASS CATCHER
FIGURE 5
2