#7600023 & 7600024 TWIN BAG CATCHER KIT FOR 38 & 42” SNAPPER / SIMPLICITY RZT RIDING MOWERS

7600023 TWIN BAG CATCHER KIT FOR 38” SNAPPER / SIMPLICITY RZT RIDING MOWER

7600024 TWIN BAG CATCHER KIT FOR 42” SNAPPER / SIMPLICITY RZT RIDING MOWER

!

WARNING

!

DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and surrounding areas are extremely hot. Avoid serious burns; allow components to cool down before installing kit. Replace worn or damaged parts prior to operating. Use approved fuel container. DO NOT smoke near open fuel container. DO NOT fill fuel tank indoors or when engine is running. Allow engine to cool for at least ten minutes before refilling. Make sure that fuel cap is tightened securely. Wipe off any spilled fuel before starting engine.

NOTE: Refer to the parts lists at the end of this manual for

additional assistance with component identification.

STEP 1 (38” Units Only): Install one air lift onto the topside of each of the four blade tips, securing with three 5/16-24 x 5/8” oval head machine screws, internal tooth lock washers and hex nuts. See Figure 1. Torque hardware to 12 ft-lbs.

SECURE AIR LIFT

TO TOP OF BLADE

WASHER

AND NUT (3)

MACHINE

38” DECK

HEX HEAD CAP

SCREW

WASHER AND

LOCK NUT

USE

EXISTING

NUTS

INSTALL BAFFLE

TO OUTSIDE

FRONT OF DECK

SCREW (3)

FIGURE 1

FIGURE 2

(Components removed for clarity)

 

 

MACHINE

42” DECK

 

 

SCREW (2)

 

 

 

 

 

 

STEP 2: Install the baffle to the front of the mower deck: 38” Decks - Secure the baffle with one 5/16 x 3/4” hex head cap screw, flat washer and center lock nut on one end, and the existing hardware on the other end. See Figure 2. 42” Decks - Secure the baffle with two 5/16 x 5/8” pan head machine screws and flange lock nuts. See Figure 3.

NOTE: One or more holes may have to be drilled into the deck in order to install the baffle. If so, install the baffle as fully onto the deck as possible with the existing holes, then drill the remaining holes with an 11/32” drill, using the baffle hole(s) as a template.

NOTE: CASTER

MAY DIFFER FROM

ONE SHOWN

INSTALL BAFFLE TO OUTSIDE

FRONT OF DECK

FIGURE 3

LOCK NUT (2)

INSTRUCTION No. 7100642 (Rev. 2, 12/14/2006) TP 200-5173-R2-AT-SN

1

Page 1
Image 1
Snapper 7600023, 7600024, 7600024, 7600023 manual Components removed for clarity

7600023, 7600024, 7600024, 7600023 specifications

The Snapper 7600024 and 7600023 are powerful lawn mowers that cater to both professional landscapers and homeowners seeking efficient gardening solutions. Central to these models is their robust build quality, designed to endure the rigors of frequent lawn maintenance while ensuring a high-performance cutting experience.

The Snapper 7600024 is equipped with a reliable 160cc OHV engine, delivering consistent power for cutting through tough grass and weeds. Its easy starting system removes the frustration often associated with traditional pull-start mowers. It features a 21-inch steel mowing deck designed for durability, ensuring a precise cut and longevity. The adjustable cutting height settings offer versatility, allowing users to customize the grass height from 1.25 inches to 4 inches, accommodating different grass types and seasonal needs.

In contrast, the Snapper 7600023, although similar in build, leverages the same powerful engine but emphasizes user comfort and convenience. This model boasts a self-propelled drive system, making it easier to maneuver across even the most challenging terrains. The rear-wheel drive provides optimal traction and stability, particularly on hilly or uneven surfaces.

A significant feature of both models is their side discharge, mulching, and bagging capabilities. This three-in-one functionality empowers users to choose their preferred method of grass disposal, whether dispersing clippings back into the lawn as mulch, collecting them in the bag for easy disposal, or side discharging for efficient mowing.

Moreover, both models incorporate Snapper's patented adjustable handle, allowing users to set their preferred height for added comfort during operation. The robust wheels are designed for superior grip, enhancing maneuverability across various ground conditions.

Both Snapper models are not just about performance; they also prioritize ease of use. The tool-less access and simple maintenance features facilitate easy cleaning and servicing. Coupled with an attractive design, these mowers stand out not just as machines but also as stylish additions to any gardening toolkit.

In summary, the Snapper 7600024 and 7600023 bring together durability, powerful performance, user-friendly features, and versatility, making them ideal choices for anyone looking to maintain a pristine lawn with minimal effort. These mowers promise reliability and efficiency, supporting homeowners and professionals alike in their gardening endeavors.