Snapper 7800932-00, 7800920-00, 7800918-00 manual Maintenance, Maintanance Chart, Emissions Control

Maintenance

! WARNING !

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. STOP engine. STOP blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine.

Emissions Control

Maintenance, replacement, or repair of the emissions control devices and systems may be performed by any non-road engine repair establishment or individual. However, to obtain “no charge” emissions control service, the work must be performed by a factory authorized dealer. See the Emissions Warranty.

Maintanance Chart

RIDER			ENGINE
Every 8 Hours or Daily			First 5 Hours
Check safety interlock system			Change engine oil
Clean debris off rider			Every 8 Hours or Daily
Clean debris from engine area			Check engine oil level
Every 25 Hours or Annually *			Every 25 Hours or Annually *
		Reproduction
Check tire pressure			Clean engine air filter and pre-cleaner **
Check mower blade stopping time			Every 50 Hours or Annually *
Check rider for loose hardware			Change engine oil
Every 50 Hours or Annually *			Replace oil filter
Clean battery and cables			Annually
Check brakes			Replace air filter
See Dealer Annually to			Replace pre-cleaner
Lubricate rider			See Dealer Annually to
Check mower drive belts			Inspect muffler and spark arrester
Check mower blades **			Replace spark plug
* Whichever comes first			Replace fuel filter
** Check blades more often in regions with sandy soils			Clean engine air cooling system
or high dust conditions.	Not
			* Whichever comes first

** Clean more often in dusty conditions or when airborne debris is present.

21