Snapper Regular, Maintenance, MAINTENANCE SCHEDULE & PROCEDURES, Check Tire Pressures, PSI, bar

Regular

Maintenance

MAINTENANCE SCHEDULE & PROCEDURES

The following schedule should be followed for normal care of your tractor and mower.

TRACTOR AND MOWER		ENGINE
Every 8 Hours or Daily		First 5 Hours
Check safety interlock system		Change engine oil - see engine manual
Clean debris off tractor and mower deck		Every 8 Hours or Daily
Clean debris from engine compartment		Check engine oil level - see engine manual
Every 25 Hours or Annually *		Every 25 Hours or Annually *
Check mower blade stopping time		Clean engine air filter and pre-cleaner **
Check tractor and mower for loose hardware		Every 50 Hours or Annually *
Check Tire Pressures	Reproduction
Check tire pressure		Change engine oil
Every 50 Hours or Annually *		Replace oil filter
Check tractor brakes		Annually
Clean battery and cables		Replace air f l er
See Dealer Annually to		Repla e pre- leaner
Lubricate tractor and mower		See Dealer Annually to
Check mower blades **		Inspect m ffler and spark arrester
* Whichever comes first		Replace spark plug
** Check blades more often in regions with sandy soils		Replace fuel filter
high dust conditions.		Clean engine air cooling system
		* Whichever comes first
		** Clean more often in dusty conditions or when airborne
		debris is present.
Tire Pressure should be checked periodically, and
maintained at the levels shown in the chart (Figure 7).
Note that these pressures may differ slightly from the
“Max Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut		Size	PSI	bar
quality, and extend tire life.
		22 x 10,0-8	10	0,68
		20 x 8,0-8	10	0,68
		15 x 6,0-6	12-14	0,82-0,96

Figure 7. Tire Pressure

18