Snapper CP216018KWV manual CRP216018KWV, CP215518HV, Was

HANDLES & CONTROLS (Upper End)

Item	Part No	Qty	Description	Note
1	7074411	1	HANDLE, Upper
2	7074156	1	HANDLE, Middle
3	7074418	1	BAIL, OPC Control
4	7034872	1	CLIP, Zone Control
5	7074141	1	CABLE, Zone Control (56-5/16” Long)	CP216018KWV &
				CRP216018KWV
--	7029344	1	CABLE, Zone Control (49.98” Long)	CP215518HV
6	7074473	1	HANDLE, Clutch
7	7028407	1	GRIP, International Symbol
8	7034604	1	CABLE, Clutch Control (41-1/4” Long)
9	7012121	1	COVER, Vinyl
--	7075305	1	COVER, Grip	CP215518HV
10	7012122	1	SPRING, Clutch- 21S
11	7074003	1	BRACKET, Shift
12	7074133	1	ROD, Speed Control (1/4-28 thread)
13	7091305	1	SCREW, 3/8-16 x 2” Hex Head Cap, GR 5
14	7031961	2	WASHER, 7/16” Flat
15	7028465	2	WASHER, Nylon
16	7091190	2	BOLT, 5/16-18 x 1-1/2” Curved Head
17	7091576	2	NUT, 1/4-20 Hex	Was 91100
18	7023813	3	CLIP, Wiring Harness
19	7079577	2	SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5
20	7026219	1	CLAMP, 7/8” Double Cable
21	7090505	2	SCREW, 1/4-20 x 2” Hex Head Cap, GR 5
22	7090053	2	WASHER, 1/4” Internal Tooth Lock	Was 91023
23	7074140	1	CONTROL PANEL (w/o Electrical Switch Hole)
24	7091200	4	SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
25	7014343	2	BUSHING, .27 x .35 x .4 Flange
26	7023792	1	PIN, 1/4 x 1-1/2”
27	7091020	1	PUSH-NUT, 1/4”
28	7023810	1	FOAM GRIP, 18.75” long
29	7090391	3	WASHER, 5/16” Internal Tooth Lock
30	7029366	1	DECAL, Commercial, WBM
31	7091511	2	NUT, 5/16-18 Hex, GR 5	Was 91069
32	7029782	1	DECAL, OPC Bail (International Symbol)
33	7028488	1	GUIDE, Rope (1/4-20 thread)
34	7028568	1	WASHER, Belleville
35	7091585	1	NUT, 3/8-16 Hex Center Lock

Footnotes:

21" STEEL DECK WALK BEHIND		Manual No. 7006140
SERIES 18	5	TP 400-5048-1-WB-N