Section 3 - MAINTENANCE

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

3.3.10.Check “MAINTENANCE SCHEDULE” Section of Engine Owner’s Manual for additional engine service.

3.4SERVICE - ANNUALLY

3.4.1.Perform all maintenance as specified in “MAINTENANCE SCHEDULE” Section of this manual.

3.4.2.ENGINE

Perform all maintenance as specified in Engine Owner’s Manual.

3.4.3. FUEL FILTER

Service fuel filter as instructed below, on COLD ENGINE ONLY!

IMPORTANT: To stop flow of fuel, tank may be removed from bracket and set on the floor so the fuel level will be below the filter. Refer to Section “REMOVING FUEL TANK”.

1.Remove hose clamps from fuel filter.

2.Remove fuel lines from filter. Discard filter.

3.Install new fuel filter. See Figure 3.11.

4.Reinstall fuel tank into bracket.

HOSE

CLAMPS

FUEL

FILTER

P.N. 1-4359

FIGURE 3.11

3.5EVERY TWO YEARS

In addition to regular maintenance, the following components of the Rear Engine Rider should be carefully inspected every two years for wear or damage. Replace worn or damaged parts with genuine SNAPPER replacement parts available from an authorized SNAPPER dealer.

3.5.1.All bushings and pivot areas.

3.5.2.Check both front wheel king pins.

3.5.3.Transmission shift lever and detent.

3.5.4.Clutch disc.

3.5.5.Clutch Yoke (See Figure 4.8).

3.5.6.Mower deck linkage and pivot areas.

3.6STORAGE (OUT OF SEASON)

If desired, the Rear Engine Rider can be stored on the rear bumper. Perform the following procedures to insure the Rear Engine Rider will operate properly when taken out of storage.

3.6.1.Thoroughly clean the Rear Engine Rider by removing all grass clippings and debris.

3.6.2.Perform maintenance and lubrication as required.

3.6.3.Drain fuel from fuel tank.

3.6.4.Start engine and allow it to run until engine runs out of fuel. This allows the carburetor and fuel system to remain clean during storage.

3.6.5.Remove battery. Refer to Section

“BATTERY STORAGE”.

3.6.6.Close vent on fuel filler cap.

3.6.7.Carefully stand Rear Engine Rider on rear bumper in desired location for storage.

3.7REMOVING FUEL TANK

Before removing fuel tank from rear engine rider, move rider outdoors where fumes can be easily dissipated. Removal of the tank is accomplished from the left side of the machine by pulling the tank straight up and away from the fuel tank bracket. See Figure 3.12. Holding the fuel tank, remove the fuel filler cap and pour remaining fuel in an approved container.

FUEL

FILLER

CAP

FUEL TANK

FUEL

TANK

BRACKET

FIGURE 3.12

20

Page 20
Image 20
Snapper E281123BVE, E281323BVE, E331523KVE Service Annually, Fuel Filter, Every TWO Years, Storage OUT of Season

E281123BVE, E281323BVE, E331523KVE specifications

The Snapper E281123BVE, E281323BVE, and E331523KVE are cutting-edge lawn mowers engineered for both performance and ease of use. These models represent the pinnacle of modern landscaping technology, offering superior features that cater to both residential and professional users.

One of the standout features across these Snapper models is their powerful engine options. The E281123BVE and E281323BVE feature reliable, high-torque engines that are designed to handle even the toughest grass conditions. The E331523KVE takes it a step further with an enhanced engine that provides additional horsepower, making it ideal for larger yards or commercial applications. This ensures that users can tackle dense grass and uneven terrain with ease.

The cutting technology employed in these models is another highlight. The Snapper mowers come equipped with advanced mulching capabilities that allow for efficient clippings recycling. This system not only returns nutrients to the soil but also minimizes the need for bagging. The adjustable cutting height feature, available in all three models, allows users to easily customize their mowing experience based on grass type and desired lawn appearance.

In terms of design, the Snapper E281123BVE and E281323BVE are manufactured with a user-friendly approach. They include ergonomic handles for comfortable operation, as well as a compact frame that enhances maneuverability in tight spaces. The E331523KVE boasts a larger cutting deck, which permits quicker mowing across vast areas, thereby improving efficiency for both homeowners and professionals.

These lawn mowers are also equipped with cutting-edge technologies that elevate their functionality. Features like electric start options ensure that starting the mower is a hassle-free experience. Additionally, all three models showcase a durable construction that can withstand harsh outdoor conditions, ensuring longevity and reliability.

Safety features are paramount in the Snapper lineup. These models include innovative mechanisms that safeguard against accidental starts, while their robust design ensures stability during operation. The easy-to-access controls and intuitive layout enhance user experience, making maintenance simple and straightforward.

In summary, the Snapper E281123BVE, E281323BVE, and E331523KVE are high-performance lawn mowers that combine advanced engineering, user-friendly features, and robust safety mechanisms. With their powerful engines, efficient cutting technology, and durable construction, they stand out in the marketplace, making lawn care an effortless task for anyone. Whether for residential use or professional landscaping, these models provide a reliable solution for maintaining a pristine lawn.