Snapper E331520KVE Includes Items 2 Thru 13,15,16, Includes P.N Fender, Bushing, Models, 15 HP

Chain Case, L.H. Fender

Item	Part No	Qty	Description	Note
1	7052683	1	ASSEMBLY, Chain Case	(Includes Items 2 Thru 13,15,16,
				& 31 Thru 33)
2	7041136	1	CASE, Sprocket
3	7028761	1	GASKET, Case Cover
4	7011121	2	WASHER, .640 I.D. Belleville
5	7010756	2	BEARING, Ball
6	7018963	1	SPROCKET & SHAFT
7	7010614	1	KEY, 1/8 x 5/8" Woodruff
8	7039778	1	COVER, Chain Case
9	7010942	2	BEARING, Needle
10	7011086	2	WASHER, Nylon Thrust
11	7040355	1	HUB & SPROCKET
12	7010941	1	CHAIN, 46 Pitch (#35)
13	7090913	10	SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)	Was 90307
14	7011024	1	PLUG, Oil Fill & Check
15	7022785	1	ROLLER
16	7010776	1	RING, 1/2" External Retaining (Heavy Duty)
17	7037285	1	FENDER, Left Hand (1.628" I.D. Hole)	(28" Models)
17	7059183	1	FENDER & BEARING ASSY, LH (Bushing)	(Includes P.N. 37285 Fender &
				P.N. 52827 Bushing
17	7037958	1	FENDER, Left Hand (1.744" I.D. Hole)	(33" Models)
17	7051451	1	FENDER & BEARING ASSY, LH (Ball Bearing)	(Includes Fender P.N. 3-7958 &
				Bearing P.N. 1-4624); (33"
				Models, 15 HP)
18	7014625	1	COLLAR, Lock	(Includes P.N. 90776 Set Screw,
				1/4-20 x 114"); (Used with ball
				bearing, item 32, only)
	7090776	1	Set Screw; 1/4-20 x 1/4" (Not shown but in lock collar)
19	7050918	1	BEARING, Left Hand Fender	(Includes Item 20) (28" Models)
20	7013324	1	FITTING, Lube
21	7011070	1	ROD, Cross-Tie
22	7012332	2	CLAMP, Boot, 2"
23	7075115	1	BOOT, Oil Seal	Was 17084
24	7011071	2	WASHER, Thrust Nylon
25	7011072	1	WASHER, Thrust
26	7091505	1	NUT, 5/8-18 Hex Nyloc
27	7010969	1	NUT, 5/16-24 Hex Flange Lock
28	7019260	2	O-RING
29	7023447	1	SPACER
30	7012271	1	WASHER, Shim	(As required to achieve 5/16"
				gap)
31	7027981	6	WASHER, Shim
32	7014624	1	BALL BEARING, Left Hand Fender	(33" Models)
33	7061017	1	GREASE, Transmission	(Use 2 oz. maximum)

Footnotes:

EUROPEAN REAR ENGINE RIDER		Manual No. 7006077
SERIES 20	23	TP 400-5248-2-RE-N