22
DECAL IDENTIFICATION
(8) OPERATOR PRESENCE CONTROL (OPC): Arrow
points to the OPC bail. When bail is rotated
rearward, the engine may be started and will run as
indicated by the engine with rotating arrow. With
the engine running, the blade is rotating as
indicated by the cut grass symbol. When the bail is
released and rotates forward, the engine will stop.
(9) CLUTCH: Located on the plastic grip of the
traction control lever. Moving the lever toward the
handle engages the traction clutch and forward
motion starts. When the lever is released, the clutch
disengages and forward motion stops.
(10) SHIFT WARNING: Located on the middle
handle. Indicates that the engine must be stopped
before shifting ground speed control.
(11) INJURY WARNING: Indicates possible severe
injury from rotating cutting blades.
(12) CE DECAL: Indicates European Certification.
(13) LWA-100: Indicates European noise level
certification.
EUROPEAN PERFORMANCE:
Maximum level of vibration measured at the
operators hand 19.1 m/sec2
(14) DANGER! DO NOT operate with baffle removed.
Read Operator’s manual. Place baffle in lower
position when conditions are dry or when bagging
leaves.