IMPORTANT SAFETY INSTRUCTIONS

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

10.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

11.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

12.DO NOT operate mower without the entire grass catcher or guards in place. DO NOT point discharge at people, passing cars, windows or doors.

13.Slow down before turning.

14.Watch out for traffic when near or crossing roadways.

15.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

3

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

7.DO NOT change engine governor speed settings or overspeed engine.

8.Check grass bag assembly frequently for wear or deterioration to avoid thrown objects and exposure to moving parts. Replace with new bag if loose seams or tears are evident. Replace slider or bag adapter if broken or cracked.

9.Mower blades are sharp and can cut. Wrap the blades or wear heavy leather gloves and use CAUTION when handling them.

10.DO NOT test for spark by grounding spark plug next to spark plug hole; spark plug could ignite gas exiting engine.

11.Have machine serviced by an authorized SNAPPER dealer at least once a year and have the dealer install any new safety devices.

12.Use only genuine SNAPPER replacement parts to assure that original standards are maintained.

Page 2 Page 4
Page 3
Image 3
Snapper EMRP216017B important safety instructions Operation, Maintenance and Storage
Page 2 Page 4

EMRP216017B specifications

The Snapper EMRP216017B is a robust and efficient lawn mower designed for homeowners seeking a reliable solution for maintaining their lawns. Known for its exceptional performance and innovative features, this mower stands out in the competitive market of outdoor equipment.

One of the hallmark features of the Snapper EMRP216017B is its powerful engine. The mower is equipped with a dependable Briggs & Stratton engine, which is recognized for its durability and efficiency. This engine provides ample power to handle various grass types and terrains, ensuring a smooth and even cut every time.

The Snapper EMRP216017B boasts a unique rear-wheel drive system. This technology enhances maneuverability, allowing users to navigate around obstacles such as trees and flower beds with ease. The rear-wheel drive also ensures improved traction, particularly on slopes or uneven ground, making it an ideal choice for diverse landscapes.

Another significant aspect of the Snapper EMRP216017B is its Versamow System. This innovative feature allows users to mulch, bag, or discharge clippings with a simple lever adjustment. The versatility provided by this system not only promotes healthier grass growth but also saves time and effort, as homeowners can choose the best option for their lawn maintenance needs.

The mower also features a 21-inch steel mower deck, designed to provide a precise and clean cut. The durable construction of the deck ensures longevity, while its design allows for excellent airflow, which is essential for optimal clipping distribution. Furthermore, the adjustable cutting height feature gives users the flexibility to tailor the mower’s performance to their specific lawn conditions.

Comfort is another key characteristic of the Snapper EMRP216017B. The ergonomic handle is designed for user-friendly operation, reducing fatigue during extended mowing sessions. Additionally, the mower offers a convenient foldable design, making it easy to store in limited spaces.

In conclusion, the Snapper EMRP216017B is a comprehensive lawn care solution that combines power, versatility, and user comfort. Its advanced features, such as the Briggs & Stratton engine, rear-wheel drive, and Versamow System, make it an ideal choice for homeowners looking to maintain a beautiful lawn with minimal effort. Whether tackling a small yard or managing a larger landscape, this mower is engineered to deliver quality results every time.
Top Page Image Contents