Operator Safety

!

Important Operator Safety Instructions

!

WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind and body and must not be under the influence of any substance, which might impair vision, dexterity or judgment. If you have any questions pertaining to your machine which your dealer cannot answer to your satisfaction, call or write the Customer Service Department at SNAPPER, McDonough, Georgia 30253. Phone: (1-800-935-2967).

Protection for Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

1.KEEP children out of the mowing area and under the watchful care of a responsible adult other than the operator.

2.DO NOT allow children in yard when machine is operated and turn machine OFF if anyone enters the area.

3.DO NOT allow pre-teenage children to operate machine.

4.ALLOW only responsible adults & teenagers with mature judgment under close adult supervision to operate machine.

5.DO NOT pull mower backwards unless absolutely necessary. LOOK and SEE behind and down for children, pets and hazards before and while backing.

6.USE EXTRA CARE when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Slope Operation

1.Slopes are a major factor related to slip and fall acci- dents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, DO NOT mow it.

2.Mow across slopes, never up-and-down. Exercise extreme CAUTION when changing directions on slopes. DO NOT mow steep slopes or other areas where stability or traction is in doubt. Refer to the Slope Guide at the end of this manual.

3.Use extra care with gcrass catchers or other attach- ments; these affect the handling and the stability of the machine.

Preparation

(Continued From Previous Column)

4.Handle fuel with extra care. Fuels are flammable and vapors are explosive. Use only an approved fuel container. DO NOT remove fuel cap or add fuel with engine running. Add fuel outdoors only with engine stopped and cool. Clean spilled fuel and oil from machine. DO NOT smoke.

5.Check the area to be mowed and remove all objects such as toys, wire, rocks, limbs and other objects that could cause injury if thrown by blade or interfere with mowing. Also note the location of holes, stumps, and other possible hazards.

6.Keep people and pets out of the mowing area. Immediately, STOP Blade, Stop engine and Stop mower if anyone enters the area.

7.Check shields, deflectors, switches, blade controls and other safety devices frequently for proper operation and location.

8.Make sure all safety decals are clearly legible. Replace if damaged.

9.Protect yourself when mowing and wear safety glasses, a dust mask, long pants, and substantial footwear. DO NOT mow barefooted or with sandals.

10.Know how to STOP blade and engine quickly in preparation for emergencies.

11.Use extra care when loading or unloading the machine into a trailer or truck.

12.Check grass catcher components frequently for signs of wear or deterioration and replace as needed to prevent injury from thrown objects going through weak or torn spots.

Preparation

1.Read, understand, and follow instructions and warnings in this manual and on the mower, engine and attachments. Know the controls and the proper use of the mower before starting.

2.Only mature, responsible persons shall operate the machine and only after proper instruction.

3.Data indicates that operators age 60 and above, are involved in a large percentage of mower-related injuries. These operators should evaluate their ability to operate the mower safely enough to protect themselves and others from serious injury.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

1.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

2.Use only an approved fuel container.

3.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

4.DO NOT refuel the machine indoors.

5.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

2

www.snapper.com

Page 4
Image 4
Snapper ERP2187519BV, EP2187519BV specifications Protection for Children, Slope Operation, Preparation From Previous Column

ERP2187519BV, EP2187519BV specifications

The Snapper ERP2187519BV, also known as EP2187519BV, is a highly versatile and efficient piece of equipment designed to meet the demanding needs of various industries. This model is known for its reliability, ease of use, and advanced features that streamline operations and enhance productivity.

One of the key features of the Snapper ERP2187519BV is its robust construction. Designed with durability in mind, it can withstand heavy usage in tough environments, making it an ideal choice for industrial applications. The equipment is made from high-quality materials that resist wear and tear, ensuring longevity and reducing maintenance costs.

The Snapper ERP2187519BV is equipped with a powerful motor that offers efficient performance and optimal energy consumption. The motor is designed to deliver consistent power output, allowing users to complete tasks more quickly and effectively. This efficiency not only improves productivity but also results in lower operating costs.

In terms of technology, the Snapper ERP2187519BV features advanced control systems that enable precise operation. The user interface is intuitive, providing operators with easy access to various settings and operational modes. This allows for quick adjustments to be made, accommodating different tasks and environments seamlessly.

Another standout characteristic of the Snapper ERP2187519BV is its versatility. It comes with multiple attachments and accessories that can be easily swapped out, allowing it to perform a wide range of functions. Whether for landscaping, maintenance, or construction, the flexibility of this equipment makes it a valuable asset in any workflow.

Additionally, the Snapper ERP2187519BV emphasizes user comfort and safety. With ergonomic designs and safety features integrated into its operation, users can work more comfortably and securely. This consideration for the operator’s experience enhances productivity while minimizing the risk of accidents.

Overall, the Snapper ERP2187519BV stands out in the market for its combination of durability, advanced technology, versatility, and user-friendly design. It is engineered to help professionals tackle various challenges efficiently, making it an indispensable tool in today’s fast-paced industrial landscape. Whether used in small businesses or large enterprises, it meets the high standards of performance and reliability that users demand.