Snapper GT600 manual Troubleshooting, Adjustment, & Service, Seat Adjustment, Brake Adjustment

Troubleshooting, Adjustment, & Service

Seat Adjustment

Seat Slide Adjustment

The seat can be adjusted forward and back. Move the lever (A, Figure 41), position the seat as desired, and release the lever to lock the seat into position.

A

Figure 41. Seat Adjustment A. Seat Adjustment Lever

Brake Adjustment

1.Disengage the PTO, stop the engine, block the wheels, remove the ignition key, and engage the parking brake.

2.Remove the mower deck (see Mower Deck Removal).

3.Locate the brake spring (A, Figure 42). Measure the length of the compressed brake spring with the park- ing brake on. The compressed brake spring length should be 3-1/2 to 3-3/4” (8,9-9,5cm).

4.If necessary, adjust the brake spring locknut to achieve the correct compressed spring length.

If this does not correct a braking problem, see your dealer.

A

3.5-3.75"

(8.9-9.5cm)

Figure 42. Brake Adjustment

A. Brake Spring

38