Snapper LE3171R, LE3191R, LE3191E Operating Instructions, Danger, Engaging Auger

Models: LE3171R, LE3191R, LE3191E

1 18
Download 18 pages 20.05 Kb
Page 10
Image 10
2.2.6. ENGAGING AUGER

Section 2 - OPERATING INSTRUCTIONS

WARNING

Objects can be thrown by the snow thrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from area.

2.2.6. ENGAGING AUGER

1.Pull auger control against handle to engage auger. See Figure 2.6.

WARNING

DANGER

DO NOT clean out discharge chute with hands. Contact with moving parts inside chute will cause serious injury. Use clean out tool provided with machine.

Release auger clutch control and make sure auger/impeller has STOPPED before rotating discharge chute or adjusting deflector. DO NOT place hands near auger/impeller while engine is running.

2.2.7.DISCHARGE CHUTE and DEFLECTOR ADJUSTMENT

1.Release auger control and allow auger to come to a complete stop before performing any adjustments.

2.Loosen deflector knob and position deflector to desired angle. Retighten knob.

3.Rotate discharge chute in desired direction. See Figure 2.7.

2.2.8. STOPPING

Stop the auger by releasing the auger control. Stop the engine by turning the key switch to the “OFF” position. Always remove key from key switch before leaving machine unattended. See Figure 2.8.

10

Page 10
Image 10
Snapper LE3171R, LE3191R, LE3191E important safety instructions Operating Instructions, Danger, Engaging Auger