Snapper LE3170R, LE3191E, LE3190E, LE3190R, LE3191R, LE3170E, LE3171R manual LE Models

AUGER HOUSING, DRIVE SYSTEM, CHASSIS

Item	Part No	Qty	Description	Note
31	7024626	1	PULLEY, Idler	19” Models
31	7027460	1	PULLEY, Single Flange Idler	17” Models
32	7090669	1	SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
33	7024621	1	SPRING, Idler Torsion
34	7024620	1	BUSHING, Pivot
35	7091195	3	SCREW, #10-16 x 3/4” Pan Head Self-Tap
36	7033692	1	AXLE, 3/8” Dia. Wheel
37	7014098	4	WASHER, 3/8” Flat
38	7026160	2	WHEEL, 7 x 1.50
38	7026240	2	WHEEL, 7”	Models 3190M, 3190E & Series
				1
39	7014667	2	PUSH NUT, 3/8”
40	7090010	5	WASHER, #10 Flat
41	7024852	1	SUPPORT, Fuel Tank
42	7091573	1	BOLT, 1/4-20 x 5/8” Short Neck Carriage, GR 5	Was 90666
43	7090372	1	NUT, 1/4-20 Hex Nyloc
44	7027924	2	SPACER, Hex (2.69” long)	17” Models
44	7027925	2	SPACER, Hex (3.69” long)	19” Models
45	7035947	1	BLADE, Scraper	17” Models
45	7035948	1	BLADE, Scraper	19” Models
46	7091148	4	SCREW, 1/4-20 x 1/2” Pan Head Machine (Torx)
47	7090372	4	NUT, 1/4-20 Hex Nyloc
48	7090372	2	NUT, 1/4-20 Hex Center Lock	Was 91099
49	7047026	1	WELDMENT, Auger	17” Models
49	7047025	1	WELDMENT, Auger	19” Models
50	7029566	4	SHOE, Flite	17” Models
51	7018638	4	SHOE, Flite	19” LE Models
51	7029565	4	SHOE, Flite	Models 3190M, 3190E & 19”
				Series 1
51	7014612	2	SHOE, Center Flite
52	7091286	24	SCREW, #10-24 x 1/2” Hex Washer Self-Tap Sems
53	7090391	1	WASHER, 5/16” Internal Tooth Lock
54	7090052	1	WASHER, 1/4” Split Lock
55	7010935	2	WASHER, 3/4” Flat

Footnotes:

Note* Riveted housing, throat & ring assembly with scraper installed

Note** 1994 & earlier models use a different belt guard & one hex spacer. If replacing item 5 belt guard, install (2) item 44 hex spacers & hardware.

(L.E.) SINGLE STAGE		Manual No.	7006026
SERIES 0 & 1	11	TP 400-5024-M-LE-N