Section 4 - ADJUSTMENT & REPAIR

4.2.4.ADJUSTING MOWER BLADE – 33” DECK (Continued from previous page)

MEASURE THE DISTANCE

BETWEEN DECK LIP AND

BLADE TIP

FIGURE 4.5

WARNING

DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool.

NOTE: On 33” decks, the measurement between the blade tip and deck lip should be 5/16".

5.Repeat steps 2 and 3 with blade tip “B”.

6.If measurement between blade tips and deck are different and there is more than 1/16” difference between blade tip measurements, adjust blade as follows:

a.Loosen jam-nuts on blade bar.

b.Adjust jack screws “IN” or “OUT” until blade tip measurements are within 1/16” of each other. See Figure 4.6.

c.Tighten jam-nuts.

LOOSEN JAM NUTS, ADJUST JACK SCREWS “IN” OR “OUT” TO LEVEL BLADE WITH

JACK SCREW

JAM NUT

4.2.5.33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) NOTE: Adjust tire pressure, 12 P.S.I. front and rear, before adjusting deck.

1.Move tractor to a firm, level surface.

2.Turn engine "OFF". Remove key.

3.Place a piece of angle iron under center rear of deck.

4.Remove hair pins and washers securing rear of deck to sector plates. See Figure 4.7.

5.Slide sector off of pins and carefully lower deck onto angle iron.

6.Rotate blade(s) until blade tips are at each side of deck.

7.Measure distance from blade tip to floor on each side of deck. Blade tips should be within 1/8" of each other for the deck to be considered level. See Figure 4.8.

SECTOR PLATE

REMOVE

HAIRPIN &

WASHER

FIGURE 4.7

33” DECK SHOWN SIDE TO SIDE VIEW

MEASURE

ANGLE IRON

FROM BLADE

 

TIPS TO FLOOR

 

FIGURE 4.8

8.If measurement differs more than 1/8", adjust as follows:

a.Loosen front lift arm pivot bolt on front of right side rail. See Figure 4.9.

LOOSEN PIVOT BOLT

LOOSEN SHOULDER

BOLT

SIDE VIEW OF DECK

FIGURE 4.6

TURN ECCENTRIC

 

AS REQUIRED

 

FIGURE 4.9

20

Page 19
Image 19
Snapper LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV Adjusting Mower Blade 33 Deck from previous

LT150H33IBV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV specifications

The Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, and WLT170H38IBV are part of Snapper's robust lineup of lawn tractors designed for residential and commercial landscaping needs. These models are engineered for efficiency, durability, and comfort, making them perfect for tackling various mowing tasks.

One of the standout features across these models is the powerful engine options. Equipped with reliable Briggs & Stratton engines, these tractors provide ample horsepower to handle tough mowing conditions. The LT150H331BV and LT150H38IBV boast a 150cc engine that delivers dependable performance, while the WLT170H38IBV features a more powerful 170cc engine, allowing for increased cutting speeds and improved overall efficiency.

The cutting deck on these models varies, with sizes generally around 38 inches to 42 inches, offering a balance between maneuverability and cutting capacity. The mulching capability is another significant advantage, allowing homeowners to recycle grass clippings, which promotes healthier lawns. Many of these tractors also feature adjustable cutting height settings, providing versatility for different grass types and mowing conditions.

Ergonomics play a crucial role in user satisfaction, and Snapper has designed these models with comfortable padded seats and easy-to-reach controls. The availability of hydrostatic transmission in models like the WLT150H38IBV allows for smooth speed adjustments, enhancing the user experience during operation.

In terms of technology, these Snapper lawn tractors often incorporate smart cut technology, which automatically adjusts the engine speed based on the mowing conditions. This feature not only results in a cleaner cut but also aids in fuel efficiency. The compact design of these tractors ensures easier storage and maneuverability around landscaping obstacles.

Durability is at the forefront of Snapper’s construction, with heavy-duty steel frames and reinforced decks designed to withstand regular use. These models are also backed by Snapper's reputation for quality, ensuring users can rely on their performance for many seasons.

In summary, the Snapper LT150H331BV, LT150H38IBV, WLT150H38IBV, WLT170H38IBV, LT150H33IBV, LT150H38IBV, and WLT170H38IBV offer a blend of power, comfort, and innovative features. Whether you are maintaining a small residential lawn or a larger area, these tractors provide the reliability and efficiency needed for effective lawn care.