Section 3 - MAINTENANCE

3.2.2. CHECK GREASE LEVEL IN TRANSMISSION

NOTE: Do not spill grease or oil on surface of drive disc. See Figure 3.3.

3.Reinstall transmission plug.

4.Check grease level after each 25 hours of operation.

KEEP DRIVE DISC CLEAN !

FIGURE 3.3

WARNING

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool. Wear heavy leather gloves when handling or working around cutting blades. Blades are extremely sharp and can cause severe injury.

IMPORTANT: Drain fuel tank before tipping mower. DO NOT tip machine with carburetor or spark plug down. Oil from crankcase will saturate the air filter and cause the engine to be hard to start or not start at all. If contamination does occur, the air filter will have to be replaced.

3.2.3. CHECK MOWER BLADE

1.Disconnect spark plug wire and secure end away from plug.

2.Tilt mower up on its rear wheels for access to the blade cap screw. Do not tilt mower with spark plug or carburetor down. See Figure 3.4.

3.Check torque of blade retaining cap screw.

Recommended torque should be 40 ft. lbs.

See

Figure 3.4.

 

4.Check blade for sharpness, wear and damage. Refer to Section “Blade Wear Limits”.

3.2.4. CHECK ENGINE DRIVE BELT

1.Visually check engine drive belt for cracking, fraying, severed or belt strands exposed. If worn or damaged, replace belt before operating mower.

3.2.5. CHECK TRANSMISSION POLY-V BELT

1.Visually check poly-v belt for cracking, fraying, severed or belt strands exposed. If worn or damaged, replace belt before operating mower.

RECOMMENDED BLADE RETAINING CAP SCREW TORQUE VALUE SHOULD BE 40 FT. LBS.

FIGURE 3.4

3.3 SERVICE - ANNUALLY

Perform all maintenance as described in the “Service Schedule” section of this manual.

3.3.1. Engine

Service engine according to engine owner’s manual.

3.3.2. Air Filter

Refer to engine owner’s manual for service instructions.

3.3.3. Engine Oil

Refer to engine owner’s manual for service instructions.

3.4 STORAGE PROCEDURE

Refer to the Engine Owner’s Manual for directions regarding engine storage preparations. Prepare the mower for “end of season” storage as follows:

1.Drain fuel from fuel tank and let engine run until all fuel is out of the carburetor.

2.Disconnect and remove the spark plug wire away from spark plug before any other preparations are made!

3.Tape all openings closed to prevent spraying water into exhaust or air intakes during washing.

4.Tilt mower up on its rear wheels and thoroughly clean the underside of the deck. Do not tilt mower with spark plug or carburetor down. Scrape away any accumulation of grass with a putty knife and or wire brush.

5.Lubricate all exposed metal with a light coating of oil to prevent corrosion.

6.Loosen handle knobs. Carefully fold the handles forward, “flexing” the control cables to prevent cable damage.

7.Store the mower in a shed or other dry area, protected from weather.

13

Page 13
Image 13
Snapper MR216017B Check Mower Blade, Check Engine Drive Belt, Check Transmission POLY-V Belt, Service Annually

MR216017B specifications

The Snapper MR216017B is a robust and reliable lawn mower designed for homeowners seeking an efficient and effective way to maintain their lawns. This particular model stands out with a variety of features and technologies that enhance its performance and user-friendliness, making it an ideal choice for both novice and experienced gardeners.

One of the key features of the Snapper MR216017B is its powerful 163cc engine. This engine ensures consistent power and reliable starting, which is essential for tackling various types of grass and terrain. The self-propelled feature is another significant advantage, as it allows users to effortlessly navigate through their lawns without excessive physical exertion. This is particularly beneficial for larger properties or those with uneven ground.

The cutting deck of the Snapper MR216017B is designed for superior performance. With a 21-inch steel deck, it provides a wide cutting path that allows for faster mowing. The durable construction of the deck ensures longevity and resistance against wear and tear. Additionally, the mower comes with a 3-in-1 cutting system, which means it offers mulching, bagging, and side discharge options. This versatility enables users to select the best cutting method for their lawn care needs.

User comfort and convenience are also prioritized in the design of the Snapper MR216017B. It features an ergonomic handle that can be adjusted to multiple heights, accommodating various user preferences and ensuring a comfortable grip during operation. The readily accessible controls make it easy to switch between the different mowing modes and adjust the cutting height, allowing for customization based on grass length and type.

Moreover, the Snapper MR216017B incorporates innovative technologies that enhance its overall functionality. The mower's signature “Easy Start” system simplifies the starting process, reducing the hassle often associated with traditional mowers. The rear-wheel drive offers improved traction and maneuverability, especially on hilly or challenging terrains.

In summary, the Snapper MR216017B is equipped with a powerful engine, a versatile 3-in-1 cutting system, and features that enhance user comfort and convenience. With its durable construction and innovative technologies, this mower stands out as a reliable tool for maintaining a pristine lawn. Whether you are a seasoned landscaper or a first-time mower user, the Snapper MR216017B is designed to meet your lawn care needs effectively and efficiently.