Section 2 -OPERATING INSTRUCTIONS

WARNING

2.12INSTALLATION of RECYCLING COVER (Optional Accessory on Some Models)

DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.

GRASP SLIDER. PULL Z-

FOLD INTO SLIDER

It will be necessary to remove bag adapter and grass bag or discharge deflector before installing recycling cover. See previous section for instructions. Install the recycling cover and secure to the side and top of the deck with the two nuts provided on the machine. Slide top portion of cover under nut secured to the deck. See Figure 2.18.

RECYCLING

COVER

FIGURE 2.16

INSTALL RECYCLING COVER TO THE DECK USING THE TWO NUTS

2.11INSTALLATION of DISCHARGE DEFLECTOR (Optional accessory on some models)

Install discharge deflector if discharging is desired. Grass Bag and Bag Adapter or Recycling Cover must be removed.

1.Remove front and rear nuts that secure Bag Adapter or Recycling Cover to deck. Refer to

sections concerning these parts.

2.Install discharge deflector and secure to deck using hardware just removed in Step 1. Slot in front edge of discharge deflector must be under nut as

shown and both bolts protruding through holes in the side of the deflector. Secure nuts to the side of

deflector. Tighten nuts securely. See Figure 2.17.

INSTALL

SLIDE

DISCHARGE

DEFLECTOR

DEFLECTOR

SLOT

FIGURE 2.18

2.13RECYCLING OPERATION

NOTE: For best recycling results, cut up to a maximum of 1/3 of grass blade length and recycle ONLY when grass is dry.

1.Set all wheels inthe highest cutting position (Notch 7).

2.Move engine speed control to "FAST" (Rabbit) position.

3.Move ground speed control to slowest speed setting.

4.Proceed mowing slowly. If grass is very dense, lower each rear wheel latch one notch lower than the front

wheel latches to improve recycling performance.

WARNING

DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deteriorationduring normal use. Inspect frequently and replace worn or damaged components immediately.

INSTALL

FIGURE 2.17

WARNING

Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deteriorationand wear during normal usage. Check condition of bag before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER. The grass catcher isoptionalequipment on some models.

11

Page 11
Image 11
Snapper P216019KWV, P217019BVE, P2167519B important safety instructions Recycling Operation

P216019KWV, P217019BV, P2167519B, P217019BVE specifications

The Snapper P217019BVE, P216019KWV, P217019BV, and P2167519B are a selection of high-performance lawn mowers designed to meet the needs of both residential and commercial users. These models are characterized by their durability, innovative features, and user-friendly designs, making them suitable for a variety of lawn care tasks.

One of the key features of these Snapper mowers is their powerful Briggs & Stratton engines. These engines are known for their reliability and efficient performance, providing ample power to tackle tough grass conditions. The P217019BVE and P217019BV feature a self-propelled drive system, allowing users to navigate uneven terrain with ease. This attribute significantly reduces the physical effort required by the operator, making lawn maintenance less of a chore.

The cutting deck design is another highlight of these models. Snapper has engineered these mowers with a 21-inch steel cutting deck that ensures a clean and precise cut. Additionally, users can easily adjust the cutting height, allowing for customization based on grass types and desired lawn aesthetics. The mulching capability enhances versatility, enabling users to recycle grass clippings back into the lawn for added nutrients.

The Snapper P216019KWV, with its innovative technology, boasts an electric start feature, eliminating the hassle of pull-starting. This convenience is particularly appreciated by those who may struggle with traditional starting methods. Furthermore, all models are designed with easy-to-use controls, ensuring a comfortable mowing experience for users of all skill levels.

Durability is another essential characteristic of Snapper mowers. With rust-resistant materials and reinforced construction, these machines are built to withstand the rigors of frequent use. The P2167519B also features large rear wheels that enhance stability and maneuverability, making it easy to navigate through tight spaces or uneven landscapes.

In summary, the Snapper P217019BVE, P216019KWV, P217019BV, and P2167519B models stand out for their powerful engines, self-propelled systems, adjustable cutting decks, and user-friendly features. Designed for both performance and durability, these mowers are perfect for anyone looking to maintain a beautifully manicured lawn with ease and efficiency, providing excellent value in the realm of outdoor power equipment.