IMPORTANT SAFETY INSTRUCTIONS

SAFE HANDLING OF GASOLINE

(Continued From Previous Page)

1.DO NOT remove fuel cap or add fuel with the engine running. Allow the engine to cool before refueling.

2.DO NOT refuel the machine indoors.

3.DO NOT store the machine or fuel container inside where there is an open flame, spark or pilot light such as on a water heater or other appliances.

4.DO NOT fill fuel containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place the containers on the ground away from the vehicle before filling.

5.Remove gas-powered equipment from the vehicle or trailer and refuel it on the ground. If this is not possible, then refuel equipment using a portable container, rather than a gasoline dispenser nozzle.

6.DO NOT start gas powered equipment in enclosed vehicles or trailers.

7.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. DO NOT use a nozzle lock- open device

8.If fuel is spilled on clothing, change clothing immediately.

9.DO NOT overfill a fuel tank. Replace fuel cap and tighten securely.

OPERATION

1.DO NOT put hands or feet near or under rotating parts. Keep clear of discharge area while engine is running.

2.STOP engine when crossing gravel drives, walks, or roads, and under any conditions where thrown objects might be a hazard.

3.Mow only in daylight or good artificial light.

4.DO NOT operate mower while under the influence of alcohol or drugs.

5.After striking a foreign object or if mower vibrates abnormally, STOP the engine, disconnect and secure spark plug wire. Inspect the mower for any damage and repair the damage before starting.

6.DO NOT mow near drop offs, ditches or embankments. Operator could lose footing or balance.

7.STAY ALERT for holes and other hidden hazards. Tall grass can hide obstacles. Keep away from ditches, washouts, culverts, fences and protruding objects.

8.DO NOT mow on wet grass. Always be sure of your footing. Keep a firm hold on the handle and walk, never run. Slipping could cause injury.

9.ALWAYS stay behind handle when engine (motor) is running.

3

OPERATION

(Continued From Previous Column)

10.DO NOT leave the machine with the engine running. STOP BLADE and STOP ENGINE before leaving the operators position for any reason.

11.Before cleaning, repairing or inspecting make certain engine, blade and all moving parts have STOPPED. Disconnect and secure spark plug wire away from plug to prevent accidental starting.

12.STOP engine and wait until the blade comes to complete STOP before removing grass bag and/or clearing grass.

13.DO NOT operate mower without the entire grass catcher, discharge guard, rear guard or other safety devices in place and working.

14.DO NOT point discharge at people, passing cars, windows or doors.

15.DO NOT discharge material against a wall or obstruction. Material may ricochet back towards the operator.

16.Slow down before turning.

17.Watch out for traffic when near or crossing roadways.

18.DO NOT operate engine in enclosed areas. Engine exhaust gases contain carbon monoxide, a deadly poison.

19.Only use accessories approved by the manufacturer. See manufacturer’s instructions for proper operation and installation of accessories.

MAINTENANCE AND STORAGE

1.DO NOT store mower or fuel container inside where fumes may reach an open flame, spark or pilot light such as in a water heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure. Store fuel container out of reach of children in a well ventilated, unoccupied building.

2.Keep mower and engine free of grass, leaves or excess grease to reduce fire hazard and engine overheating.

3.When draining fuel tank, drain fuel into an approved container outdoors and away from open flame.

4.Keep all bolts, especially blade bolts, nuts and screws properly tight. Check that all cotter pins are in proper position.

5.Always provide adequate ventilation when running engine. Engine exhaust gases contain carbon monoxide, a deadly poison.

6.Service engine and make adjustments only when engine is stopped. Removed spark plug wire from spark plug and secure wire away from spark plug to prevent accidental starting.

Page 2 Page 4
Page 3
Image 3
Snapper R196019B important safety instructions Operation, Maintenance and Storage
Page 2 Page 4

R196019B specifications

The Snapper R196019B is a versatile and efficient lawn mower designed to meet the needs of both residential and commercial users. This mower stands out in the crowded landscape of outdoor power equipment due to its combination of innovative features, robust design, and user-friendly functionalities.

At the heart of the Snapper R196019B is a reliable 196cc engine, which delivers powerful performance while ensuring optimal efficiency. This four-stroke engine is known for its durability and consistent power, making it capable of tackling various lawn conditions. Its self-propulsion system allows users to navigate inclines and uneven terrain with ease, as it drives the mower forward automatically, requiring less effort from the user.

One of the notable features of the Snapper R196019B is its versatile cutting system. It offers three-in-one functionality, allowing users to choose from bagging, mulching, or side discharge options. This adaptability allows for flexibility based on personal preferences or specific lawn care needs. The mulching feature, in particular, is advantageous, as it finely chops grass clippings and returns them to the lawn, providing essential nutrients that promote healthy grass growth.

The mower is equipped with a sturdy 21-inch steel cutting deck, which ensures a precise and even cut while enhancing durability. The adjustable cutting height feature offers multiple positions, allowing users to customize grass length based on seasonal requirements or aesthetic preferences.

In terms of design, the Snapper R196019B boasts a compact, lightweight structure, which makes it easy to maneuver and store. The ergonomic handle provides comfort during operation and can be adjusted to accommodate different user heights, promoting ease of use.

Safety features are a priority in the Snapper R196019B, with an operator presence control that ensures the engine stops when the user releases the handle. This precaution minimizes the risk of accidents and enhances overall safety while mowing.

The Snapper R196019B is a perfect choice for homeowners looking for a reliable, efficient lawn mower that adapts to various mowing tasks. Its powerful engine, versatile cutting options, and thoughtful design make it a worthy investment for maintaining a beautiful lawn. Whether tackling thick grass or navigating around obstacles, this mower provides a blend of performance and convenience that meets the demands of modern lawn care.
Top Page Image Contents