Snapper R5002R, R8002BE, RT5X, R5002B manual Was 32263 Used on 5HP Only

Tiller Head

Item	Part No	Qty	Description	Note
1			* SPACER	Was 32263 (Used on 5HP Only)
2			BRACKET, Mounting	Was 47866 (Used on 8HP Only)
3		2	* STUD	Was 14381
4	7090187	2	WASHER, 5/16 Split Lock
5	7091511	2	NUT, 5/16-18 Hex	Was 90196
6			* SHIELD	Was 38068
7	7090358	8	SCREW, 5/16-24 x 2 1/2" Hex Head Cap (Gr.8)
8	7014334	10	SPACER, .625 OD x .388 ID x .801 Long
9	7090815	8	SCREW, 3/8-16 x 1/2" Self Tapping (8HP)	Was 90506
10	7036058		BRACKET, Mtg. Left (8HP)
	7036033		BRACKET, Mtg. Left (5HP)
11	7036057		BRACKET, Mtg. Right (8HP)
	7036034		BRACKET, Mtg. Right (5HP)
12	7092062	8	NUT, 5/16-24 Hex Lock	Was 11201
13	7090799	6	BOLT, 5/16-18 x 5/8" Short Neck Carriage
14	7035060		COVER, TINE
15	7035063		PLATE, Right Side
16			* MOULDING, Trim	Was 14422
17	7090122	6	WASHER, 3/8" Flat
18	7090134	3	SCREW, 3/8-16 x 3/4" Hex Head Cap (Gr.2)
19	7091302	3	NUT, 3/8-16 Hex	Was 90130
20	7036036	1	GUARD, Splash
21	7091619	2	NUT, 3/8-16 Flange Lock (5HP only)	Was 90613
22	7013633		GRIP, Depth Bar
23	7047808		STRUCTURE, Depth Bar
24	7091601	16	NUT, 5/16-18 Hex Flange Lock	Was 90585
25	7021866		SPACER, .5 OD x .33 ID x .4 Long
26	7051375		ASSEMBLY, Tiller Chain Case	(See "Main Chain Case"
				Illustration & Parts List)
27	7090209		SCREW, 5/16-18 x 1" Hex Head Cap
28	7090289	2	NUT, 3/8-24 Hex Center Lock
29	7014586	2	BOLT, 3/8-24 x 2 1/4" Shear
30			ASSEMBLY, Tine 13" (8HP)(See Tine Assembly Group)	Was 51513 and 60687
			ASSEMBLY, Tine 11.5" (5HP)(See Tine Assembly Group)	Was 51579 and 60749
31	7090188	3	WASHER, 5/16 Flat (3)
32	7091841	2	SCREW, 5/16-18 x 1" Self Tapping	Was 90369
33	7014875		FINGER, Belt
34	7011714		PIN, Hair 2.25" (8HP)

Footnotes:

* NOTE: This part may be available from DPNI 1-800-558-1848 (Todd Graff)

LARGE FRAME REAR TINE TILLERS		Manual No. 7006033
SERIES 2	33	TP 400-5202-5-RT-N