Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
WARNING
DO NOT operate without entire Grass Catcher or guard in place. Grass Catcher components are subject to deterioration during normal use. Inspect frequently and replace worn or damaged components immediately.
STEP 3: Route recoil rope around outside of rope guide
pulley. See Figure 2.12. (NOTE: Recoil rope may need to be slackened. Refer to “Starting & Operation”.)
ROUTE RECOIL ROPE
AROUND PULLEY
SECURE
ADAPTER
TO DECK
FIGURE 2.12
2.9INSTALLATION OF GRASS BAG (Door Type Bag)
STEP 1: Install grass bag adapter. Refer to Section “Installation of Grass Bag Adapter”.
STEP 2: Install grass bag by sliding connector over adapter flange. See Figure 2.13.
STEP 3: Attach grass bag hooks over middle handle cross bar. See Figure 2.13.
WARNING
Grass Catcher bags used on SNAPPER products are made of woven fabric, and are subject to deterioration and wear during normal usage. Check condition of bag before each use. Immediately replace worn or damaged catcher bags with only bags recommended by SNAPPER. The grass catcher is optional equipment on some models.
HOOK TO MIDDLE
HANDLE CROSS BAR
SLIDE
CONNECTOR
OVER FLANGE
FIGURE 2.13
10