Inspect and Clean Unit and Decals

Snapper SB2000M Inspect and Clean Unit and Decals, Replace Fuel Filter, Clean AIR Filter

REPLACE FUEL FILTER

CLEAN AIR FILTER

CHECK MUFFLER MOUNTING

SCREWS

REPLACE SPARK PLUG

CARBURETOR ADJUSTMENTS

SB2000M specifications

Models: SB2000M

Cleaning the air filter:

For Parts Call K&T 606-678-9623 or 606-561-4983

S After each use, inspect complete unit for loose or damaged parts. Clean the unit and decals using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

To replace fuel filter, drain unit by running it dry of fuel, then remove fuel cap/retainer assem- bly from tank. Pull filter from tank and remove it from the fuel line. Install new fuel filter on fuel line; reinstall parts.

Air Filter

Fuel Line

Air Filter

Cover

Fuel Filter

	Once each year, ensure muffler mounting
Screws	screws are secure and tightened properly to
	prevent damage.

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean or replace air filter after every 5 hours of operation or yearly, whichever comes first.

1.Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the cover is removed.

2.Remove parts as illustrated.

NOTE: Do not clean filter in gasoline or other flammable solvent. Doing so can create a fire hazard or produce harmful evaporative emis- sions.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Apply a few drops of oil to the filter; squeeze filter to distribute oil.

6.Replace parts.

Replace spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch. Ignition timing is fixed, nonadjustable.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and dis- card.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch socket wrench.

4.Reinstall the spark plug boot.

Mounting

Screw

Screws

1.Loosen and remove the 2 screws from the muffler cover.

2.Remove the muffler cover.

3.Tighten the 2 muffler mounting screws se- curely.

4.Reinstall muffler cover and 2 screws. Tighten securely.

There is no screw for idle adjustment on your blower. The throttle lever is used to control engine speed. The throttle lever can be placed in one of four positions: STOP, IDLE

or , FULL THROTTLE or

, and one

intermittent position. If your enginewill not run properly or you require further assistance, contact an authorized service dealer or call 1--800--554--6723.


	WARNING: Perform the following		open flames from water heaters, electric
	WARNING: Perform the following		motors or switches, furnaces, etc.
steps after each use:		S	Store unit with all guards in place. Position
S	Allow engine to cool, and secure the unit		unit so that any sharp object cannot acci-
	before storing or transporting.		dentally cause injury.
S	Store unit and fuel in a well ventilated area	S	Store unit and fuel well out of the reach of
	where fuel vapors cannot reach sparks or		children.

-- 8 --

www.mymowerparts.com

The Snapper SB2000M is a powerful and versatile lawn mower designed to make lawn care easier and more efficient for homeowners and landscaping professionals alike. With its robust features and innovative technologies, the SB2000M stands out in the competitive outdoor power equipment market.

One of the most notable features of the Snapper SB2000M is its reliable 190cc engine. This engine provides ample power to tackle even thick grass with ease. Its easy-to-start system ensures that users can quickly get to work without the hassle of complicated starting procedures. The durable steel cutting deck is designed for longevity, providing a perfect combination of strength and weight, enabling the mower to manage various terrains effectively.

The SB2000M comes equipped with a 21-inch cutting deck, which offers users the ability to cover large areas while still being maneuverable enough to navigate around obstacles such as flower beds and trees. The adjustable cutting height feature allows users to customize their lawn care experience with six different height settings, ranging from one to four inches. This feature ensures that homeowners can achieve their desired lawn appearance, whether they prefer a closely manicured look or a more natural finish.

In terms of technology, the Snapper SB2000M boasts an advanced rear-wheel drive system, which enhances its maneuverability. This drive system provides better traction while mowing on slopes and uneven ground, making it an ideal choice for varied landscapes. The self-propelling capability allows for less strain and effort, allowing users to mow larger areas with minimal fatigue.

Moreover, the Snapper SB2000M supports both mulching and bagging options, offering flexibility depending on user preferences and lawn care needs. The mulch plug enables grass clippings to be finely chopped and returned to the lawn, providing natural fertilization, while the rear bag can efficiently collect clippings for disposal or composting.

Safety features are also a priority with the SB2000M. The engine automatically shuts off when the operator releases the handle, minimizing risks associated with accidental operation. Additionally, the folding handlebar makes storage easier, reducing the amount of space needed when the mower is not in use.

In summary, the Snapper SB2000M is a feature-rich mower that combines power, agility, and user-friendly technology, making it an ideal choice for anyone looking to maintain their lawn effectively. With its durable construction, adjustable cutting heights, and dual grass management options, it established itself as a top-tier option for achieving a healthy and attractive lawn.

Muffler Cover

Muffler Cover