Snapper SERIES 19 manual Handles & Controls

HANDLES & CONTROLS

Item	Part No	Qty	Description	Note
1	7074411	1	HANDLE, Upper
2	7074156	1	HANDLE, Middle
3	7033985	1	HANDLE, Lower LH (Adjustable)
4	7033986	1	HANDLE, Lower RH (Adjustable)
5	7074418	1	BAIL, OPC Control
6	7034872	1	CLIP, Zone Control
7	7034608	1	* CABLE, Zone Control (52-63/64” Long)
7	7074141	1	* CABLE, Zone Control (56-5/16” Long)
7	7078078	1	* CABLE, Zone Control (50-31/64” Long)
7	7100976	1	* CABLE, Zone Control (53-47/64” Long)
8	7074473	1	HANDLE, Clutch
9	7028407	1	GRIP, International Symbol
10	7034604	1	CABLE, Clutch Control (41-1/4” Long)
11	7012121	1	COVER, Vinyl
12	7012122	1	SPRING, Clutch - 21S
13	7074003	1	BRACKET, Shift
14	7024641	2	TIE, Wire, 1.29 long, black
15	7073822	1	BRACKET, Bell Crank
16	7013849	1	SPACER, .33 x .63 x .156
17	7073913	1	BELL CRANK
18	7074140	1	CONTROL PANEL (w/o Electrical Switch Hole)	Used on Manual Start Models
18	7074469	1	CONTROL PANEL (w/Electrical Switch Hole)	Used on electric start models
18	7073826	1	CONTROL PANEL (w/o wheel drive slot)	used on 2167519BFC &
				2167519B
19	7091200	4	SCREW, 1/4-20 x 1/2” Pan Head Self-Tap (Torx)
20	7091130	2	WASHER, .33 x .88 x .09 Flat
21	7091904	1	SCREW, 5/16-18 x 7/8” Hex Head Cap, GR 5
22	7090895	1	TEENUT, 5/16-18	or 7090538
23	7012114	1	BUSHING, Differential, .328 x .625 x .41
24	7090595	2	BOLT, 5/16-18 x 3/4” Hex Flange Lock GR 5
25	7091070	2	NUT, 5/16-18 Hex Flange Lock, GR 5	or 7090585 or 7091601
26	7091067	1	NUT, 5/16-18 Hex Center Lock
27	7074113	1	LEVER, Shift
28	7091606	1	NUT, 5/16-24 Hex Center Lock GR 5	or 7091074
29	7023813	1	CLIP, Wiring Harness
30	7091189	4	SCREW, 5/16-18 x 1-7/8” Curved Head GR 2	or 7091740
31	7035744	4	KNOB, 5/16-18 Wing (Black)
31	720727	4	KNOB, 5/16-18 Wing (Black)	Briggs part

Footnotes:

NOTE: * Part number and revision is stamped on cable.

21" STEEL DECK WALK BEHIND MOWERS		Manual No. 7006149
SERIES 19	5	TP 400-5187-B-WB-N