Operating the Walk Behind Mower

OPERATING ON A SLOPE

While it is not recommended, traveling up and down slopes may be required from time to time. These guide lines are listed for your safety.

Traveling Up a Slope

Since the hill climbing ability of the machine will probably far exceed any other machine you may have operated, caution should be observed.

•Never make abrupt speed or directions changes on a slope.

•Never push down on the handle bars while going up a grade. A slight lifting pressure is recommended to keep the front wheels on the ground.

Traveling Down a Slope

A very slow ground speed should always be used when traveling down a slope. This can be accomplished by GENTLY moving the ground speed control levers towards the reverse direction.

STOPPING THE MOWER

•Returning the ground speed control levers to the neutral position will stop movement.

•Disengage the PTO.

•Release the operator presence / parking brake han- dles to engage the parking brake.

•Move the throttle control to mid-throttle position and turn the ignition key to OFF. Remove the key.

MOWING

•Make sure the PTO switch is disengaged.

•Start the engine (see STARTING THE ENGINE).

•Set the throttle control to FULL.

•Grasp the operator presence / parking brake handles and the handle bar grips at the same time to deacti- vate engine kill system and disengage the parking brake.

•Engage the PTO by pulling up on the PTO switch.

•Begin mowing. See Lawn Care Section in the back of this manual for tips on mowing patterns, lawn care, and trouble shooting information.

•When finished, disengage the PTO.

•Stop the engine (see STOPPING THE MOWER).

PUSHING THE MOWER BY HAND

DO NOT TOW MOWER

Towing the unit will cause hydraulic trans- mission damage. Do not use another vehi- cle to push or pull this unit.

•Disengage the PTO, turn the ignition OFF, and remove the key.

•Slide the hydraulic release rod forward and lock into the top of the “T” slot. See Figure 2.

•Grasp the operator presence / parking brake handles and the handle bar grips at the same time to disen- gage the parking brake.

The mower can now be pushed by hand.

•After moving the mower, re-engage the transmission (DRIVE position) by releasing the rod from the “T” and sliding the release handle towards the rear of the machine.

NEUTRAL POSITION

DRIVE POSITION

Figure 2. Hydraulic Release Rod

00

10

Page 9 Page 11
Page 10
Image 10
Snapper SFH13320KW Operating on a Slope, Stopping the Mower, Mowing, Pushing the Mower by Hand
Page 9 Page 11

SFH13320KW specifications

The Snapper SFH13320KW is a versatile and powerful lawn mower designed to meet the needs of homeowners seeking efficiency and reliability. This robust mower is powered by a durable 13.5 HP Briggs and Stratton engine, ensuring that it can handle a variety of mowing tasks with ease. One of the standout features of the SFH13320KW is its 33-inch cut width, which allows for efficient mowing in both large yards and tighter spaces, making it ideal for residential properties of all sizes.

Equipped with a 7-speed transmission, the Snapper SFH13320KW offers exceptional maneuverability and control. Users can effortlessly adjust their speed to match the terrain and type of grass being mowed, ensuring optimal cutting performance. The model’s adjustable cutting height ranges from 1 to 4 inches, allowing for personalized lawn care that caters to different grass types and seasonal variations.

One of the remarkable technologies employed in the Snapper SFH13320KW is its lever-controlled drive system. This system provides homeowners with easy operation and allows for quick starts and stops, enhancing user experience and safety. The mower’s compact design features a tight turning radius, making it easy to navigate around trees and garden beds, resulting in a well-manicured lawn without the hassle of missed patches.

The Snapper SFH13320KW also incorporates a robust steel deck, known for its durability and resilience against rust and corrosion. This ensures that the mower remains in excellent condition even after multiple mowing seasons. Furthermore, the electric start option eliminates the need for manual pulling, simplifying the starting process and making it accessible for users of all ages.

Additional characteristics include large rear wheels that provide superior traction and stability, making it easier to tackle uneven terrain. The mower also features a comfortable seat with an ergonomic design, reducing fatigue during extended mowing sessions.

In conclusion, the Snapper SFH13320KW combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners. With its reliable engine, adjustable controls, and sturdy construction, this mower stands out as a reliable tool for maintaining a beautiful and healthy lawn. Whether you're dealing with a small yard or a larger landscape, the Snapper SFH13320KW is equipped to handle your mowing needs effectively.
Top Page Image Contents