Section 4 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.

4.3.8.MOWER DECK ADJUSTMENT (LEVELNESS) Front to Rear Deck Pitch (33” Deck)

With the YARD CRUISER on a smooth, level surface, rotate blade until blade tips are at front and rear of deck. Measure the distance from blade tips to floor. The distance should be the same, or the rear 1/4” lower than the front. If the rear blade tip is higher or is more than 1/4” lower than the front, proceed with adjustment.

1. Remove rear hanger chains.

2. Turn each hanger pivot the same number of rotations on the eye-bolt to raise or lower the rear of the deck. See Figure 4.11.

3. Reinstall rear hanger chains and measure blade tips again.

4. Repeat steps “a” through “c” until proper levelness is obtained.

FRONT

REAR

SIDE VIEW OF DECK

ROTATE HANGER

PIVOT UP TO RAISE

DECK OR DOWN TO

LOWER DECK

REAR LIFT ARM

FIGURE 4.11

Front to Rear Deck Pitch (38” Decks)

With the YARD CRUISER on a smooth, level surface, rotate blades until blade tips are at front and rear of deck. Measure the distance from blade tips to floor. The distance should be the same, or the rear 1/4” higher than the front.

If the rear blade tip is lower or is more than 1/4” higher than the front, proceed with adjustment.

1.Remove rear hanger chains.

2.Turn each hanger pivot the same number of rotations on the eye-bolt to raise or lower the rear of the deck. See Figure 4.12.

3.Reinstall rear hanger chains and measure blade tips again.

4.Repeat steps “a” through “c” until proper levelness is obtained.

FRONT

REAR

ROTATE HANGER PIVOT:

UP TO RAISE DECK OR DOWN

TO LOWER DECK

FIGURE 4.12

4.3.9.MOWER DECK TIMING ROD

The mower deck timing rod is pre-adjusted at the factory. It is set to maintain the deck in the same attitude through all heights of cut. If the timing rod requires adjustment, contact an authorized SNAPPER dealer for service. See Figure 4.13.

ADJUSTING

DO NOT ADJUST

NUT

 

TIMING

ROD

38” DECK SHOWN

FIGURE 4.13

19

Page 18 Page 20
Page 19
Image 19
Snapper YZ145332BVE, YZ145382BVE important safety instructions Front to Rear Deck Pitch 38 Decks, Mower Deck Timing ROD
Page 18 Page 20

YZ145332BVE, YZ145382BVE specifications

The Snapper YZ145332BVE and YZ145382BVE are two notable models in the Snapper lawn mower lineup, renowned for their innovative features and cutting-edge technologies. Designed with user convenience and performance in mind, both models cater to homeowners looking for reliable and efficient lawn care solutions.

Starting with the YZ145332BVE, this model is equipped with a powerful 14.5 HP engine that ensures robust performance, allowing users to tackle even the toughest mowing tasks. The 33-inch cutting deck offers a balanced compromise between maneuverability and cutting width, making it ideal for both small and medium-sized lawns. One of the standout features of the YZ145332BVE is its adjustable cutting height, which provides users with the flexibility to choose between different grass lengths to suit their personal preferences or lawn conditions.

On the other hand, the YZ145382BVE model takes performance a notch higher with its enhanced 14.5 HP engine and a wider 38-inch cutting deck. This model is perfect for users with larger lawns, as it can cover more ground in less time, ultimately improving mowing efficiency. Like its counterpart, the YZ145382BVE also features an adjustable cutting height, allowing users to customize their mowing experience according to the specific needs of their lawn.

Both Snapper models boast a user-friendly design with easy-to-use controls, making them accessible to novice and experienced users alike. The intuitive operation of the mowers reduces the learning curve, enabling users to focus on getting their lawn care tasks done effectively. Additionally, Snapper's robust build quality ensures durability, making the YZ145332BVE and YZ145382BVE dependable companions for years to come.

Furthermore, the innovative technologies integrated into these models, such as the automatic transmission, provide seamless forward and reverse motion, further enhancing the ease of operation. Their lightweight design allows for easy maneuvering around obstacles, enabling users to navigate tight corners and difficult areas without hassle.

In summary, the Snapper YZ145332BVE and YZ145382BVE are prime examples of efficient, reliable, and user-friendly lawn mowers. With powerful engines, adjustable cutting heights, and advanced features, they are designed to meet the varying needs of homeowners. Whether you opt for the compact YZ145332BVE or the wider cutting deck of the YZ145382BVE, both models are engineered to deliver superior mowing performance for a well-maintained lawn.
Top Page Image Contents