AMC Series

AMC 6030

AN IN-CEILING VERSION OF SNELL’S MOST SUCCESSFUL LCR

To achieve the performance capabilities of a freestanding monitor, the flush-mount design used in the AMC 6030 overcomes three major factors that limited in-ceiling speaker performance. First, to insure predictable response, regardless of placement or construction type, the dual 5 1/4-inch woofers and low resonance tweeter are placed inside a sealed, aluminum enclosure, which defines bass response, just like a conventional loudspeaker’s enclosure, and reduces sound transfer through the ceil- ing cavity to other rooms. Second, specific materials are used to control resonance. The drivers are mounted to a well-braced and damped aluminum baffle, to enhance bass/midrange clarity and deaden wall resonance. The baffle is then welded to the well-damped, heavy gauge aluminum enclosure. Third, since flush mount speakers fail to produce a proper soundstage, the driver plane steers energy from above the ceiling line toward the listening area, at a 45-degree angle. The adjacent surfaces are lined with sound deadening materials to prevent cabinet reflections from caus- ing distortion. The result is open and clear sound that appears to be coming from the front instead of overhead. These attributes combine for a music or theater experience unheard of from an in-ceiling speaker. Designed by Snell’s chief engineer Joe D’Appolito, the AMC 6030 shares drivers and crossover from Snell’s in-room LCR7, in-wall AMC 830 and in-cabinet ICS 1030, re-engineered for the boundary and placement of a ceiling mount enclosure. The benefit is a quartet of models that can be mixed and matched to deliver the best music and theater experience possible

while blending in to any décor or room condition.

AMC 6030

 

Design

Infinite Baffle, Back-Boxed, In-Cieling LCR

 

 

Frequency Response

70Hz-20kHz+3dB

 

 

 

 

 

Sensitivity

89dB

 

 

 

 

Nominal Impedance

4 Ohms

 

 

 

 

Crossover Frequency

2kHz

 

 

 

Recommended Amplifier Power

50-250 Watts

 

 

 

Maximum Output (per pair)

110dB

 

 

 

 

 

Placement

2" x 10" Joist Ceiling

 

 

 

 

 

Drive Units

Tweeter:

1-inch SEAS Silk Dome

 

 

 

 

 

 

Woofer:

Two 5.25-inch Poly, 5mm Excursion

 

 

Input Connection

Spring Loaded, Push Post, Accepts 12 Gauge Wire

 

 

 

 

Dimensions

Finish:

Height:

15.6-inches

 

 

 

 

 

 

Width:

15.6-inches

 

 

 

 

 

 

Depth:

8.25-inches

 

 

 

Rough Opening:

Height:

14.38-inches

 

 

 

 

 

 

Width:

14.38-inches

 

 

Mounting System

8 "dog-Leg" clamps

 

 

 

 

Finishes

Cabinet:

White

 

 

 

 

 

Grille:

White, Perforated Metal 53% Open

 

 

Manufactured by

Snell Acoustics, PO 3717, Peabody MA 01960

 

 

 

 

 

www.snellacoustics.com 978-538-6262 978-538-6266fax

Page 1
Image 1
Snell Acoustics AMC 6030 dimensions Amc, AMC Series, AN IN-CEILING Version of SNELL’S Most Successful LCR

AMC 6030 specifications

The Snell Acoustics AMC 6030 loudspeaker is a sophisticated audio product that stands out in the realm of high-fidelity sound reproduction. Designed for audiophiles and music enthusiasts alike, the AMC 6030 boasts several key features and innovative technologies that enhance listening experiences across various audio sources.

One of the primary features of the AMC 6030 is its proprietary driver technology. The speaker incorporates a combination of dynamic woofers and advanced tweeters designed to deliver a broad frequency response. This means that whether you are enjoying the deep bass of electronic music or the intricate highs of classical compositions, the AMC 6030 can reproduce sounds with remarkable clarity and accuracy.

The AMC 6030 also features an elegantly engineered cabinet design that not only looks appealing but also aids in sound performance. Constructed from high-quality materials that minimize unwanted vibrations, the cabinet is precisely tuned to enhance acoustic properties. This careful construction means that listeners can enjoy a clean soundstage free from distortion, allowing for an immersive audio experience.

In terms of connectivity, the AMC 6030 supports various audio inputs, ensuring compatibility with modern audio equipment, such as home theater systems, turntables, and digital streaming devices. This versatility makes the speaker a suitable choice for different setups, whether in a dedicated listening room or as part of a multi-room audio system.

Moreover, the AMC 6030 employs advanced crossover technology that ensures a smooth transition between the various drivers. The crossover network is designed to optimize the performance of each driver, ensuring that frequencies are distributed effectively for balanced sound reproduction. This feature enhances the dynamism of the sound, allowing for an engaging listening experience across diverse genres.

In summary, the Snell Acoustics AMC 6030 is characterized by its cutting-edge driver technology, meticulously engineered cabinet, versatile connectivity options, and advanced crossover system. These features collectively result in a loudspeaker that excels in delivering high-quality sound, making it an attractive option for those who value acoustic precision and excellence in their audio equipment. Whether used for critical listening or casual enjoyment, the AMC 6030 offers a compelling audio experience that meets the needs of discerning listeners.