IC-LCR7
Dimensions:
• 19” Wide • 7” High • 8.75” Deep

Premier Series

A HI PERFORMANCE LCR THAT CAN STAND WITH
THE BEST TWO CHANNEL

The left and right speaker in an audiophile two-channel system can uncannily recreate all the complexity, detail and space of a live performance, while the center channel speaker is regarded as the most important speaker in any multi-channel, surround system. LCR’s, are a multipurpose design for both of these critical applications. The IC LCR7 is a D’Appolito Array, designed by Snell chief engineer, Joe D’Appolito. As a Left & Right it can haunt you with precision and

soundstage, while as a Center it captures every whisper, every nuance. Together they set the tonal balance, called timbre, for the rest of the system. The IC LCR7 takes its drivers and crossover design of the acclaimed Snell LCR7 and integrates them into a utility, in-cabinet LCR. As such, it is designed to fit into furniture or millwork, and is tuned to compensate for the sonic problems that these cabinet boundaries cause. The result is a speaker that perfectly matches the LCR7, and its two cousins the IW LCR7 In-Wall and OH LCR7 In-Ceiling Monitor. Any combination of these four models can be mixed and matched to make a fully integrated system that will work with any room décor.

Application Alternatives:
System Suggestions:

 

 

 

 

 

IW-LCR7 In Wall LCR7 In Room OH-LCR7 In Ceiling
Basis 150 Sub
SR7 Surround

 

 

 

 

 

Like all Snell loudspeakers, each IC-LCR7 is hand tuned for natural imaging and sonic depth.

Design:
Tweeter

Acoustic Suspension

1-inch SEAS silk dome

D’Appolito array

 

 

Woofer
Frequency Response
Two5.25-inchSEASTreatedPaper,

75Hz-20kHz ± 3dB

5mm Excursion

Sensitivity
Video Shielding

[1Watt (2.83v) @ tm]

Yes

90 dB

 

 

Crossover Frequency
Impedance

2.0 kHz

Nominal 4 Ohms

 

 

Crossover
Maximum Output

Discrete tweeter, and woofer

110 dB

circuit boards. Time alignment

 

and coherency are achieved

Recommended Power
through the transition region from

50 Watts minimum

driver to driver. Each crossover is

250 Watts maximum

individually tuned by our

 

technicians to ± 0.5db of the

Master Reference.

Boundary compensation "Normal" – When placed on stands away from wall.

"Boundary"– When placed on shelf or near wall.

Wiring

Bi-amp, bi-wire ready

Connections

5-way satin, nickel-plated, brass terminals, accepts 5/16 - inch spades, pins, banana plugs and bare wire to 12 gauge.

Cabinet Construction

Hardwood veneer over 3/4-inch MDF Panels. Textured painted MDF baffle.

Grille

Black cloth over MDF frame.

Finishes

Textured black paint. Can be ordered in most wood and paint finishes.

Weight 20 lbs.

Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.